Can CX Cloud be Integrated with Other 3rd Party Solutions?

Network with two uplink

Hello everyone,Here i have two uplink from my main core switch which is connected to Main-R.i would like to utilize both uplink same time for different network Eg:MGMT network use Service Provider as a Uplink (192.168.3.2)DATA network use Main-R as a...

Output Drops between WS-C3850-48T and WS-C2960X-24PD-L

Hi AllI've inherited a newtwork that includes the C3850 and we've installed the C2960X. These are hooked up via copper ethernet and have a very simple configurationC3850 interface GigabitEthernet2/0/2 description Uplink to C2960X switchport mode tr...

DNA Essentials, what use does it have?

Our MSP recommends the DNA Essentials license. I've recently taken over and it's been renewed a few times. I see this is for Catalyst Center? I'm looking into how I can use Catalyst Center to see if it's worth it, (we're a small shop with 6 stack and...

Compatibilidad de Cisco ISE 3.0 y dna

Buenos días a todo el team Cisco. Actualmente se tiene un Cisco ISE 3.0 Parche 4  el cual esta integrado a un DNA  con versión actual 2.2.2.8 el cual el DNA se requiere realizar el upgrade a la 2.3.5.5. ¿Hay problemas de compatibilidad con esa versio...

%RADIUS-4-RADIUS_DEAD

Trying to authenticate I have this error as shown, can anyone help me!*May 11 12:38:20.482: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.100.3:1812,18 13 is not responding.*May 11 12:38:20.482: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.100.3:1812...

Secondary WLC over the internet for APs operating on Local Mode

Dear Gents,          What are the recommendations that should be followed if we have a local site with wireless APs operating in Local Mode and registering on a local Primary WLC on the same network.  and in the case of Primary WLC failure, the APs w...

SD-WAN DIA - NAT-Type Interface , Pool , Loopback

Hi everyone, Currently, I've been using the Interface NAT type for Direct Internet Access (DIA) across multiple networks.     However, I recently came across a Cisco article (Below link) suggesting the utilization of a Loopback interface for DIA ins...

SDA Policy

I want to know if if it is possible to apply the same policy to different SVI in SDASVI 100 =Policy ASVI 200 =Policy A 

Error opening tftp server

 When I connect to the switch(2960x) for the first time with the console, I get the following error and I cannot enter any commandError opening tftp://IP/ios name.bin (Time outThank you for helping me

A9K-8HG-FLEX-TR not booting with A9K-RSP880-LT-TR running IOS XR 7.9.3

We are trying to set-up A9K-8HG-FLEX-TR in the ASR-9906 chassis with redundant A9K-RSP880-LT-TR and running IOS XR 7.9.3, but after about 2 hours the module is still in the SW_INACTIVE state.  All the lights on the module are amber color, but it does...

FirePower 1100 lost smart registration

I have a FirePower 1100 for my home lab and for some reason, it lost DNS connectivity and lost registration. I did not notice and now I can't deploy changes. I connected to the CLI and tried to ping from system. When I try to ping from system I get t...

CBS350-8P

Hi all, I have a cbs350-8p-e-2g with version 3.4.0.17, every time to reload it will show below message but I didn't make any configuration changes. Is it a bug ?"You haven't saved your changes. Are you sure you want to continue ?"

Can't make my wireless devices connect with WPA2 Enterprise

So I cant make my 2 laptops and 2 smartphones conect to my wireless device if it has WPA2-Enterprise Security. I don't know why it happens because when I eliminate the security it connects perfectly. Here's the .pkt if anyone can figure it out why

RIP routing table not loading routes.

Hi Guys n Gals,I am having a bit of trouble with an assignment I am doing in packet tracer.I don't have the files handy until the eve, so will send pics/files later if required.My problem is that I have an access router connected to 3 separate cluste...