Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,Basic call works fine, but does not work extension dial number (DTMF). Here's my scheme connections: SIP H.323SIP Provider <-------------->GW(Cisco2821)<-------------->CUCM8.5.1Router confi...
I need some assistance with the following issue I have. When the Cisco Unity Connection version 2.0.1 was installed the technician changed the login details for the OS Administration.He did not make a note of what it was set to and now we are struggl...
We are install a PRI in Gibraltar Country with the provider Gib Telecom. The issue is in the Layer 2 ISDN. The provider had done twice the test ISD30, they connect some equipment (they disconnect the cable connected to the router card E1 and connect...
Hi,Please advice, if Cisco & Avaya can work on splitting PRI.Any help is much appreciated.Thanks,
I believe HHC being a feature dependent on the phone firmware version. As it has to be enabled on CUCM, there came some doubts about my thinking and as I am unable to verify at the moment, I would like to ask if HHC being supported on Cisco Unified C...
Hello every body,I have to integrate Cisco Unity Connection 8.5 with MS Outlook for Unified Messaging.In unified messaging by default once the voice msg received it will send as wav file attachment to clients email.Because of Mail Box size issue, my ...
Hi allThe unity connection has upgrade from 7.1.5 to 8.5.1 after 30 days i have found license issue on unity connection backup server pls see below,An insufficient license violation has continued beyond the grace period. System operation will be ...
I have the following situation, one central office and tree remote offices each one have a 2911 as SRST, the 2911 also have FXO and FXS ports for analog internal users and analog trunks.When the data link with central Office it´s lost, all the IP pho...
hi,1- i have cisco router 2851 (C2800NM-IPVOICEK9-M), Version 15.0(1)M5 using the cme 7.1current falsh is 128 and the DRAM is 512i want to upgrade to c2800nm-ipvoicek9-mz.151-3.T which is about 54 mega and to cme 8.5 which is 212 megs- which gives th...
When dialing internationally we get a beep after the 5 digit is dialed. althought we can still get through but is confusing users.. Any Ideas? thanks
HiWe are currently attempting to configure a CUBE/CUCM setup to send a PRACK message back to the SP via a SIP trunk. I have followed all the documentation which I can find, and can see the CUCM is sending a PRACK message to the CUBE, but no PRACK is ...
Is there any way to download the CUE existing backup file? I have checked the CUE backup files but unable to find the license infoRegrads,Shaijal
Hi Guys,I'm deploying CUCM 8.5 in a new environment, and for some extensions the DN can't be displayed for internal calls. How can I do that on CUCM?Thanks a lotFernando
Hi all,Happy new year - 2012 Can we customize the phone export template? There are 2 options now: Default and All phone details. Default template is not giving parition and calling search space whereas All phone details template is so exhaustive. Bas...
I try to config busy aa script via CUE 8.5 on my callmanager 8.5. I config a number at 'forward all' below a DN, config a route pattern to h323 voicegateway for this number, config sip trunk on voicegateway to cue. When I try to make a call to this ...
