MPLS

Dear AllIs it possible in a Service Provider Environment for the SP to offer both Per-Destination and Per-Packet Load Balancing Services to the Dual-Homed MPLS VPN Customers simultaneously ie Customer A wants to have Per-Destination Load-Balancing ac...

Hello,I need to NAT between a pair of VRFs.  I understand the simple examples in the documentation where you have customer X and customer Y (each on their own interface/sub-interface) and want them to share a 3rd interface such as an internet connect...

Hi All,I have a 7200 router connected with ME3600 which further connected with other MEs in ring topology. I need the 7200 to waork as BRAS. the media in ring is ethernet and i want to use Layer 2 pseudowire to transport DSLAM data traffic to BRAS. c...

..I have a customer who uses MPLS to connect to all remote locations. The MPLS carrier has recently merged with another carrier, and they are in the middle of making changes to their MPLS network(s). As a result, some (but not all) of my customer's...

How to implement pim-ssm over mpls with sparse-mode and test by notebook from vlc player

Hi,Is as-path prepending on an import map a tool that should be available?I have found that on the IOS I'm testing that the prepending only applied if the same route-map is also setting local preference. Sounds like a bug to me but the bug toolkit is...

I have searched here as well as Google and cannot seem to find any confirmation of support of either IPv6 over MPLS on 2800 series routers or IPv6 VPN over MPLS on the 2800 series routers. I have fond a few documents on MPLS IPv4 over MPLS on 2800 se...

Here's my network scenario.The downstream device is a Cisco ME3600 (provider edge) where my customer connects.  Upstream is a Cisco 7600 with ES+ line cards.From the customer connecting interface, I xconnect to the upstream 7600:---------------------...

Hi,I have got a weird problems with one route being present in the VRF however it is not present int the mpls forwarding table: Below are the outputs:sh ip route vrf custU       10.0.6.0 [1/0] via 1.1.1.1C       1.1.1.1/32 is directly connected, Virt...

Hello All,I have two 3845 routers having 6M WAN links towards the MPLS cloud. Both these routers are running EBGP with the service provider.  We have taken 2 VRFs for our Internal DMZ 1 & DMZ 2 traffic. And all other corporate applications run on th...

Dear Allwe want  to implement MPLS between branches.please see Attached diagrame.kindly helpregards