Network Management

Resolved! port flaps when PC is in Power saving mode

Hi EveryoneMy Cisco LMS 2.6 installation reports a flapping port whenever a PC running Windows Vista Business is in power saving mode.While this is not a major catastrophe, my syslog is filling up very quickly with more than 10,000 records within 24 ...

LMS 3.2 HUM Issue

Dear AllI have lms ver 3.2 with HUM running on it.I had created poller managment for all devices.in HUMIssue is that for some devices when i checked the polling reports its showing all reports.But in interface detail when i clicked on detail there no...

6509E[12.2(33)SXH] doesn't support CISCO-CONFIG-COPY-MIB ??

I wish to use SNMP to copy running-config files to and from several 6509's and a TFTP server.When I run SNMPwalk on a 6509 using the CISCO-CONFIG-COPY-MIB it says there is no such object.....# snmpwalk -v2c -c <community> <device> 1.3.6.1.4.1.9.9....

Resolved! IPM 4.2.0 - Target and Source Addresses are 0.0.0.0

Hi,I'm having a problem with IPM.We are running LMS 3.2 with IPM 4.2.0.I used IPM to configure a device to perform a ping to an ad-hoc target. However, it shows that the target and the source addresses are 0.0.0.0.The target device is an ad-hoc wi...

RME 4.3.1 Inventory Collection Failure

Hi,I keep having problem collect inventory from 6506-E with Sup32. To test one of them out, I deleted one 6506-E device from the DCR, manually added it back to DCR, manually added the credential. Connectivity tests with SSHv2, SNMP RO community str...

LMS 3.2 with NAC

Hello clarke,i m going to install LMS 3.2 and also a NAC 4.1.Any precaution or guidance that will affect LMS process or flow by NAC.Thanks

Resolved! Device Discovery LMS 3.2

Hello,pls find the attached,Diagram,In the attached diagram,would i will be able to discover cisco switch??????HP switches understand CDP protocol but they dont forward CDP as what i know,correct me if i m wrong.????Thanks

Can you tell what the restorebackup.pl script is doing?

I am trying to restore an automatic backup taken last week from LMS 3.0.1 - win2K3 Standard Ed and want to restore it to the same box that has been re-imaged to LMS 3.2 - Win2K3 64 Ent EdEverything was going well - Common Services and Campus Manager ...

Resolved! Relation between DFM event and dev syslog

In LMS 3.2, DFM has 28 events to inform network administrators for any alerts. Also RME has syslog report. Looks like there are some relation between these two sets. Anyone can help me to give some brief summary for this relation?As I noticed that DF...

No Event Sets in DFM/Notification Services

Hi, when I open Event Sets in DFM I don't see any of the event codes listed. Please advise.Thanks,Mark

Campus Manager 5.3.1 UT question

I have a switch that only has all End Hosts with Last Seen timestamps of Feb 20. Some of the end hosts are still on the network, while others are not. I have one Major Acquistion every 12 hours, and one Minor Acquistion every two hours. My purge inte...

Resolved! IP SLA events will not show up in the router logs

Hello all. I have a Cisco 7609 and am running IOS version 12.2(33)SRC4. I have an IP SLA instance configured for ICMPECHO with a remote device. Everything works fine and the sh ip sla statistics shows that the SLA instance is active and working as de...

DFM 3.0.1 device discovery problem

Hi, I have 329 devices in DFM that are "pending", I'm having trouble porgressing any more than that. Please advise.Thanks,Mark

CNR 7.x in backup mode - licensing ?

HelloFor two physical servers to run CNR 7.x in backup mode, do I need 2 licenses or just one?I have single license, can install it on server #1.Server #2 requests license after installation and if server #1 is online, server #2 doesn't install the l...