Network Management

I have multiple servers attache to one of our Cisco 6000 cat OS switch. however 7 of the server information not display on UT. on ciscoview the ports for those device attached too display as "green" or connected but no information about those device ...

We used to have banner motd display our warning, and banner login to display some extra device info upon telnet login. In preparation for SSH, we have flipped the two banners to ensure users are given a warning before logging in.For SSH, banners work...

Hi,we have LMS 3.1 over Windows, CM 5.1.0. We have created some user-defined groups in Common Services group administration.When we try to display these groups from Topology Services, some devices don't appear.Data Collection works fine for all devic...

Hello,I need to add 25 VPN licenses on ASA5510 configured in Active/Standby.We 've made an upgrade from 7.3 to 8.0.4 for having the ASDM interface.I have only one authorization key for 2 equipements. When teh authorization key has been entered on the...

I have LMS 3.01 running campus mgr 5.02. An earlier post said 3.1 should have CM upgraded to 5.1.1. Does this work for 3.01?

Hi,RME VERSION:-4.0.5LMS VERSION 2.6CM0056 Config fetch failed for 10.112.200.2 Cause: CM0204 Could not create DeviceContext for 836 Cause: CM0206 Could not get the config transport implementation for 10.112.200.2 Cause: UNKNOWN Action: Check if requ...

Dear,On CiscoView, I have a link between a router and a switch which is not updated unless both devices are well discovered.The link still red unless it's working good.Is there any suggestion for the reason ? or how can solve this ?Best regards,Omar

Since I have upgrade to DFM 3.1.2 I have seen next to no Alerts when I normally receive ones daily.I get the following error in PTMServer.logMon Mar 02 12:55:57 GMT 2009 PTAProxy :: Exceptions in PTSettingDetails() :: com.cisco.nm.vhm.vpta.PTAExcepti...

Hi,Customer has LMS 3.0.1. syslog reports are empty. When we look at RME->tools->syslog->collector status:all colums are N/A except Name: LMS hostname and Update time : Not Reachable.Both SyslogCollector and SyslogAnalysor are running:Process= Syslog...

Hi experts,is there a free software for windows that can monitor only ftp and http/https ports traffic via snmp string? and can provide reports as well?thanks

I have configured SNMP in Wireless controller but SNMP is down in Net manager. WIreless access points are also not detected. What would be the reason?I have given SNMP string info as community name, gave IP address/subnet mask and enabled in Controll...