I'm trying to backup Ciscoworks database and the backup job failed due to space issue. Is there a utility to help rotate /var/adm/CSCOpx/log log files? Or any utilities to help clean up the /var/adm/CSCOpx/ directory.thanks
at a customer site I found false 'Vlans Trunk Mismatch' for CIGESM connected to a Cat6500. A SNMPwalk on 'vlanTrunkPortsVlanEnabled.<ifindex> against the trunk port on both sites of the trunk does not show any difference, so I assume it is a bug in C...
Customer has 2 MDS switches, he is not able to manage one switch using SNMP. The 2 switches have similar configuration. All the other lan switches and routers also have no problem with snmp.The community name was wrong, we changed to the right name, ...
I've got an issue with the device fault manager on CiscoWorks.Basically, what i wanted to do was to stop the ExceededMaximumUptime reported to many times on all my routers (ADSL interface). I tried to do some tweaking but even if I don't have Exceede...
I have a VPN Firewall (Cisco PIX 520)all looks good with the device it is being managed by RME, IPM, DFM and CM, however this device is not generating CiscoWork notifications when it goes offline, we had to reboot the device this morning. What should...
Hi,i have install IPM application but is not working as expected,please does anyone have any material related to this that i can o thru.Please reply thanks in advance,cheers.
I am trying to upgrade Cisco Works Resource Manager Essentials from 4.0.5 to 4.0.6 or higher. I understand I need to update Common Services 3.0.5 to 3.0.6 before hand. When I do this from the GUI I get the following message "No updates available in c...
I am a beginner at CiscoWorks, I have installed LMS 3.0. What configurations must be done in order to use LMS? on the device part; a unique device name must be assigned, snmp, cdp, rcp must be set. is that all? or do I miss something?how about on the...
Hi,We have LMS 2.6. We have configured LMS to execute the backup daily. What we want to know is what LMS backup ?Is it only the configuration of LMS like job, devices in DCR. Or does it backup the configuration of the switches too ?I mean if we resto...
hi,LMS v3.1 has likely gone to manufacturing.Would you support getting a patch in the works for it to recognize Firefox v3.thanks,Rob.http://www.spreadfirefox.com/en-US/worldrecord
hi,I am getting this message from the cisco works snmp monitor - but cant quite work out what it meansALERT ID = 00001WOTIME = Thu 19-Jun-2008 12:45:41 BSTSTATUS = ActiveSEVERITY = Cri...
Hi,I'm trying to add a device to the DCR. We can access it using telnet but when LMS 3.0.1 says it's not reachable.If I launch a "Management Station to Device" it says telnet OK. If we launch "Check device credentials" it says "Device not reachable" ...
Hi,Have LMS 3.0 on Win 2003 and a CallManager 5.1(3) cluster.Am able to detect the CallManagers as "Media Convergance Servers" - however i can't track the IP PHones as IP Phone. They only show up as End hosts.Is there support for tracking IP Phones r...
There is a device that was discovered while doing a Network Discovery that was found by CDP. The device is Unreachable so it does not display on the Topology map. We are not sure where the device is connected to and would like to find it. Is there...
Hello,I have one 6509-E Sup720 what is sending its snmp get-responses out as a broadcast packet. Of course this it not allowing the switch to be monitored over the wan as the broadcasts are being dropped over the routed hops. Has anyone ran into th...
