Network Management

Hi all,One of our customers has LMS3.01. I've added a new DefaultIpEcho collector between to remotely located machines (6500 and 4500) for historical and real-time monitoring. Credential Verification check was Ok (snmp RW/Ro community) and I've enabl...

Where I can get Cisco symbols for NNM to display all symbols in NNM

Does LMS 3.0 allow software distribution using .tar files? for example to manually upgrade a Catalyst 3560 you can either just copy the .bin IOS image or you can use the 'archive download-sw...' command to copy & extract the IOS image and the HTML f...

Hi,I already have posted this question some time ago but the only answer I have received led in the wrong direction. I allow myself to repost it even though I know that this might displease some forum members. Let me know your thoughts even if it's j...

Hi,Can someone please let me know if you have a unix script to capture interface configuration if the device is running only on ssh. I just wanted to know whether spanning tree port fast is enable on them.Thanks a lot.Anuradha.

How do you do it? What are the exact lines I need to input? I have researched this online and I think there is a way using CAR, but I just get more confused. here is my current config below. I appreciate any help. no service padservice timestamps deb...

hi,LMSv3 with all updates.Noticed in some places Common Services GUI callshttps://cwhprsrc/en_US/images/vertlines_dk.gifie, no hostname in the URI.easy to reproduce e.g. create and remove a peer server account, the call is made after the delete confi...

Hi, We have installed CiscoWorks CommonServices 3.0.5 with Operations Manager 2.0.1 but unable to add devices to Operations Manager database for monitoring purpose. While adding devices to the Operations Manager database, we are getting following err...

on cisco C6513 Version 12.2, I cant see any problem about the snmp configs but there are a lot of %SNMP-3-AUTHFAIL logs on the cisco device for HPOV NNM IP address. Today Ive tried to find a bug, but there is no bug about it :)what can be the problem...

When I try to enable NBAR on a vlan interface I get:BAR 'protocol-discovery' command cannot be turned on this interface because of the following reason:Interface is a LAN port and NBAR/STILE is not supported on LAN interfaces in PFC3.When I try to ...

Hi,Is there a way to automate "Out-of-Sync Summary", run it weekly and view it as report?Many thanks,Ron Velvez

Hi,Some of my Catalyst 2950G-48 switch have following error message :Oct 30 16:03:15.470: %SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 172.16.6.250172.16.6.250 is Ciscoworks 2000 server ( version 2.5.1 ). The community string setti...

Hi all,The device ASA 5500 was done config-archival via RME The status showed " Partial Success".Here I have a few questions:1. what do " CM0057" and "CM0005" mean? two devices or interfaces?2. What caused this issue? how to fix it?I appreciate your...