Hi,I have installed LMS 2.6 properly.Everything seems fine except, I am not getting the alerts & activities.Pls let me know what I have to do ASAP.Sachi
Hi,I have installed LMS 2.6 properly.Everything seems fine except, I am not getting the alerts & activities.Pls let me know what I have to do ASAP.Sachi
On a semi regular basis the ATM interface of several models (857/877) goes down while the router doesn't really detect it being down.A shut/no shut on the interface usually resets the condition but I wonder why the router doesn't recover all by itsel...
Hello, I am looking for a software better than visio to design my network and update it everytime, i think MS Visio is not the better one, if it's possible do you know if i can use autodiscovery tool, i would like to use a software which can take cis...
I have a problem with updating 3750 switches using LMS 2.6. I have updated 2950/4506/2811 successfully with the same Netconfig job but the 3750's fail every time. Here is the LMS error: Message: Command(s) failed on the deviceTFTP: Failed on the de...
We have a 2811 providing internet connectivity through a adsl line and I am trying to implement qos in order to improve bandwidth usage and prioritize traffic. I suppose the best place to implement qos would be the wan interface on the output directi...
Hello,I am trying to get snmpv3 work on Cisco router and using snmpget to test. ******* 1st test *******On Cisco Router:R1(config)#snmp-server group dead v3 noauthR1(config)#snmp-server user jerry dead v3On Windows:C:\usr\bin>snmpget.exe -v 3 -u jerr...
How do you run TACACS+ aaa queries on a router with a specific source interface? It seems TACACS+ uses an interface with the shortest route to destanation.
Hi,We have a 3rd party (EMC Smarts)Monitoring & Alarming tool for LAN and WAN network; however they charge us for each interface.For WAN (ATM) link, they count controllers, ATM interface, IMA and even AAL5 interface (which reports them thru SNMP).Can...
I have a few 3560 switches and if I log into them via a console cable and type show arp, I only get the switches IP and one other system that pings everything on the network to verify it is up. All the other ports with systems connected and working ...
How long dooes this process takes? I have been watching the console for several hours now.
The question is if any special OS level config or CW environment vars mod is required to get the provided workaround working:The snmpwalk no longer works (in Device Centre Tools section). I'm able to do it from the OS itself to any devices managed by...
Hello all.I've got ACS appliances but I'm looking for two tools that come with the ACS server. I don't think they come with the appliance build. Does anyone know where I can find these???The ACS documentation says - The Radtest and Tactest tools si...
Is there anyway to rebuild IOS messages in the CLI (for example "%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down") when the content of the CLI has been deleted?Example:I build a network... everything is fine... Then...
Hi All,In the last year I've worked for two companies, each running Ciscoworks LMS2.6 and in each company I've experienced the same problem. When trying to view a 2800 series router in ciscoview the message below appears.MessageCan't find applicable...
Hi folks!I've LMS 2.6 with campus manager 4.0.6.I launched the following Path Analysis:Report for the trace between 172.16.0.15 and 172.16.0.108.=====================================================Error: Unable to get the first hop information from ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 05:52 PM | ||
04-23-2024 12:20 AM | ||
04-16-2024 04:45 AM | ||
04-16-2024 01:33 AM | ||
04-13-2024 12:00 PM |
User | Count |
---|---|
2 | |
2 | |
2 | |
1 | |
1 |