09-06-2006 04:07 AM
in the DFM 2.0.5 server under the Configuration:Other-Configurations Alerts and Activities Defaults- When I create a view, It takes long time to open also after click on create button
09-07-2006 12:51 PM
What is a long time exactly? What are the specs on your server and client? How many other views do you have created?
09-11-2006 09:32 PM
It takes 4 min exactly when I click Alerts and Activies Default and also 4 min when i click Create.
This is the first view I want to create.
Number of devices in DFM only 56 devices
Number of devices in DCR 3200+
and DFM server it runs on separate server with salve mode.
server specification:
Sun Fire V210 2 cpu 1.3 Ghz, 8 GB of memory
Regarding space please find below the details:
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d0 16526762 5787795 10573700 36% /
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
swap 22294720 8 22294712 1% /var/run
swap 22294792 80 22294712 1% /tmp
/dev/md/dsk/d6 37183076 628369 36182877 2% /scratch
09-11-2006 10:18 PM
The slowness most likely stems from the number of devices in DCR. While I see a bit of slowness on my server, I do not have nearly the same number of devices in DCR, so it takes much less than four minutes to bring up the screens.
I did not find any bugs related to this slowness, so I recommend you open a TAC Service Request so a new one can be filed. Some additional VGM debugging may also be required to isolate exactly where in the code path the slowdown is occurring.
11-04-2006 02:01 AM
Now It solved with LMS 2.6 Update.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide