Other Service Provider Subjects

Hello,I used OID: 1.3.6.1.4.1.9.5.1.2.16. Some IOS can't not get the data such as:c2950-i6q4l2-mz.121-9.EA1.bin is blank.c3550-i9q3l2-mz.121-13.EA1a.bin is J0.cat4500e-ipbasek9-mz.122-53.SG1.bin is blank....Have the other OID for these IOS Thank you ...

With Ron Hanson Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Ron Hanson about the RF Gateway 1 (RFGW1) including installation, operation, configuration, and tr...

Hello:We currently use a 7301 router as an LNS and have it configured to use a local IP pool and dynamically assigns an IP address to connecting DSL modems.  We would like to start providing a static IP to a username that autheticates to a radius ser...

I am trying to identify a more robust BGP solution for a customer's network. We currently have a need to increase the number of BGP sessions we can handle and I am interested in hearing any experience that can be shared related to setting up and main...

Good day.I have a following situation: - Cisco 7600/RSP720-3CXL(12.2(33)SRD4 software) as a border with 2 fullview uplinks and a bunch of peerings - a customer, who generates large amount of egress traffic(~8Gb/s), half of which goes to uplink2, and ...

Hi,A few days ago I posted here about a problem upgrading a Media Processor 8100 (from 6.2.1 to 6.2.4). I was able to solve my problem, but now I've encountered a different problem upgrading a second 8100 box.After I ran the upgrade through the web g...

Hi All,I am trying to set Network Attack Notification for malicious traffic. I have set the Activation frequency to always, and after initializing the malicious traffic I could see that SCE has detect the attack and began to redirect the user to desi...

Like to find out the where DHCT global config (e.g. DHCT/Network Session Signaling Parameters) saved on the DNCS.

Is there a file on the USRM that stores the TSID - Service Group - Freq mapping information. Something similar to the servicegroupmap.dat file on the DNCS?If so can someone advise on how to retrieve this information?Thanks-Mo

Hi all,Is there any cisco product that can provide TDMoIP protoco?Has anyone use RAD IPMux to implement TDMoIP services?I am trying to implement TDMoIP to transport unframed E1's over MPLS in our Telco network, what could be the best solution for thi...

SCE8000 is the same chassis of 7604?. The power supply 2700-DC is compatible between this devices.christian

Hi all ,  While Manually Triggering ISDN from Cisco 1841 router , I get some Assertion Failed Loggs.What are the main causes of this issue ??Hardware issues like BRI / NT1 or IOS issue ??Thanks & Regards,ram

Hi All,When I issue the command (> p3sm –-show) on the supsciper manager machine I can notice the following line.Do anybody know what is the meaning of it.LEG block mode is on:              false.And how to enable (Auto-resync at SCE reconnect)Sample...

Hi There,We are an ISP and have an interconnect with say Provider A. Customers of ours use Provider A for layer 2 and us for Layer 3 (IP/Internet).Customer #1 to #100 --- (10Mb) --> Provider A ---> ISP ---> InternetWe'd like to rate limit some custom...