VPN

I am having some problem with anyconnect 2.2.140. Running on windows XP sp3. This has been working fine. Until I used the logmein vpn service.https://secure.logmein.comAfter installing and running the logmein - the anyconnect is broken. I have tried ...

I have an ASA running 8.3 I am using ASDM to load up a script that we use to map printers, drives etc in our windows 2003 domain.  The idea is that the script should run when connecting from anyconnect client 2.4.I have the parameter <EnableScripti...

Hi folks,Can someone please tell me what I did wrong to configure SSL VPN while using CCP. I have 1841 router running c1841-advsecurityk9-mz.124-24.T2.bin. Having it preconfigured for CCP I connected to the router and trying to create a new SSL VPN. ...

HI,I have inherited an SSL solution that I have one small issue remaining. When we open the Citrix MetaFrame bookmark, We need thisto open like an RDP session and not in another window. I didn't install the ica plugin, this was done by a colleague wh...

I've got 3 ASA 5510, upgraded them all from 8.0(4) to 8.0(5) and ASDM 6.2(3)Then I found out none of the three device responded anymore to WebVPN,like there is nothing listening to https on the outside interfaceI downgraded one back to firmwate 8.0(4...

Hi folks,I'm a bit stumped trying to find the proper information or rather guide and understand how to configure authorization for IPSec remote VPN on IOS router.Some Cisco confiruation examples say it should be as follows:aaa authorization network S...

Hi,Need some reply regarding GETVPN, all GM's connected with KS properly. After few interval of time around 2 hours approx only one GM getting Down. After clearing crypto session, removing crypto map and back it again from interface and its working f...

HI ,I have ASA 5510 connected to Linksys ADSL router modem ,There is no static public addres the only public address is the dynamic address associated by the ISP to the Linksys ADSL Modem,Is it possible to configure ASA to accept VPN to my local netw...

Hi,I have customer requirement like this. Customer wanted DSLAM in head office, users from remote locations connect to HO using ADSL modems.This is the first time I am handling DSLAM connectivity.1) What will be the DSLAM ports confiuguration connect...

Is it possible to purchase a 10-pak SSL license(ASA5500-SSL-10), install on a 5505 and then later transfer it to a 5510?

We are getting an alert from VPN CON, after changing the PEER IP of a VPN. 97077371 12/30/2009 16:45:13.520 SEV=3 IPSEC/19 RPT=5 202.125.141.52  IPSEC ESP bad pad length (130) >= buffer length (48)I havent seen this type of error could anyone tell me...

Hi,Am using ASA5550 for VPN connectivity, integrated with ACS and Windows AD.Created a userid in Windows AD for VPN user by enabling the option to change password while first login. User not getting authendicated and not prompting for changing passwo...

Hi All,I need help in troubbleshooting this issue: Site2Site vpn between an Asa 5520 and a Linux Box is up as shownciscoasa# sh crypto isa sa   Active SA: 1    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 11   ...

Currently where I work at has a couple of public IP Addresses that I can use.  However my home internet connection does not have a public static IP Address for the internet connection.  Currently I have a GRE Tunnel setup with a couple of IOS routers...