VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I am trying to setup a vpn. I am using cisco client version 4.6I am having trouble getting to my remote lan.I can connect and receive and ip from the vpnpool from the firewall, but I cannot ping or access any resources on the network.I keep going ove...

dspeciale by Level 1
  • 294 Views
  • 1 replies
  • 0 Helpful votes

concentrator is connected with core switch and server 172.28.31.171(server) is also connected in core switch.InterVLN routing is working fine. server and conncentrator is able to reach other via core switch.concentrator private Ip address 172.28.31.9...

ASA 5510 - latest IOS, RDP & Citrix plugins.For some reason, clients connecting to our terminal servers through the asa via the clientless ssl/vpn are not having their local printers mapped/created.This has never worked, and we've only been using th...

snooter by Level 1
  • 1407 Views
  • 1 replies
  • 0 Helpful votes

I have a problem a pix, from network 10.10.10.xxx attempt to ping to the Internet and not found, I attach the configuration if someone can see the error

gpepe by Level 1
  • 464 Views
  • 2 replies
  • 0 Helpful votes

concentrator is connected with core switch and server 172.28.31.171(server) is also connected in core switch.InterVLN routing is working fine. server and conncentrator is able to reach other via core switch.concentrator private Ip address 172.28.31.9...

Resolved! Dial-In Issues

Hello all,Currently trying to troubleshoot some dialin issues that we are having. We have a cisco router connected to various modems through an Async card. Currently the dial-up is not working correctly, the call connects, then drops after the init...

jkloza by Level 1
  • 1737 Views
  • 10 replies
  • 0 Helpful votes

I have a dial-up modem connected to my router's AUX port.Using this setup, I need to get remote users to access our internal servers via dial-up. The users aren't network admins, so they should not have exec access to the routers. They only need to b...

Client is able to connect without any problem, but client not able to ping or connect with any network device.In VPN session i can see bytes send and receive. My LAN-2-LAN tunnles are working fine without any problem.No firewall involoved in the path...

Resolved! IPSEC thru ASA 7.x

Topology: Router1 <->(outside)ASA(inside) <-> Router2IPSEC tunnel from Router1 to Router2with the routers being the IPSec Endpoints, do i need to explicitly permit ESP & ISAKMP on both the inside and outside interfaces in the inward direction of the ...

hi i just trying get some certifications from cisco like CCNP and some exposure to firewalls and vpn i just wanted to know is a pix 501 good for my home lab practice can learn good on it as i already have four routers and a couple of switches in my h...

i have IDS 4215 , running image :IPS-4215-K9-sys-1.1-a-5.1-7-E1.imgi installed NIC card in it (Realtek)when restart, it didn't detect the installed card. so is there any steps during the reload to do?

Hi,Iam establishing a tunnel between our remote location but its giving some error i have attached log entry of the tunnel please let me know the root cause and how to track that May 09 17:03:53 1210332833 pluto [5731]: "NortelVPN-1" #163: received D...

Hi,I have two cisco ASA 5520 device and i want to con figure failover between them.I checked in by sh version command it is showing tim has Active/Active failover lisence.But i want to configure Active/Passive failover there. How is it possible to co...

somnath21 by Level 1
  • 1077 Views
  • 1 replies
  • 0 Helpful votes

I would like to know if i can establish a point to point IPSec Transport mode tunnel between two routers with Firewalls perfoming static NAT along the path. i.e.: Does the NAT deny the availability of having a transport mode IPsec tunnel between the ...