VPN

Hi, I've had this 501 for several months now and really stuggled to get the client VPN side working.I can get site to site working with no problems using the wizard but the Client VPN never works.Latest i've set it up for pptp which I can get the cli...

Hi!I have a couple vlans on the inside that are confiured in an router, it is also def-gate to all clients. Further there is a link net (172.16.200.0/24) to the ASA 172.16.200.10 (also def-route on the router). There is no access between vlan 10 and ...

I recently upgraded to cisco asa. I configured users to connect through client VPN. on my laptop i installed VPN client software. when I connect to the asa I recieve the banner that I made to verify connection and it shows as connected. after I c...

I have a presentation server farm sitting behind a Cisco ASA. The ASA acts as the Citrix Access Gateway in this design and provides a WebVPN connection with Secure Desktop to the remote client via SSL. The Cisco ASA is configured with a certficate fr...

We have a site to site tunnel between a PIX 515e and sonicwall. The remote users can connect to the pix and access the LAN. I need to configure the routing on the PIX so that VPN users can access the LAN on the Sonicwall side too. Please let me know ...

When the main frame goes down and the backup ISDN tries to comeup we are getting "invalid spid" error message.. The carrier confirmed that the SPID number we are using on the router is correct but we still getting the same error.. Any Idea what could...

Hello,Can anyone assit with this? Getting warning in syslog that UDP port 56616 is being blocked by ACL. I just tok a look and noticed that UDP port 56616 is reserved for private port. Anyone know what this could be as well as the source?02-12-2007 0...

Hi all,i am looking for eqvivalent of IOS command:crypto map xxx local-address Loopback0Is it possible to link crypto map with other IP address as real interface address on PIX?Thank you in advance.

Hi,After configuring my ezvpn on cisco 877 with SDM, I can connect with client VPN 4.0 but I cant browse my LAN. Here you are my real configuration. I'm a newbie and need help please.Vpn client work on laptop with XP proAnd I Have a domain inmy offic...

Hi all,Can any one guide me for CCSP certification.which exam can i start as firts point..is CSVPN or SNPA

Hi,For some reason I can't change the speed on the inside interface on the pix 501. Whenever I try to use the command (interface ethernet1 10full) it comes back with the message: "ethernet1 can only be set to 100full". Is there a way to change the sp...

I need to enable VPN and dial-up client to authenticated by AD Windows

We are in the process of purchasing to ASAs to replace our 3030 VPN Concentrator. I have a couple of questions.1)I'm pretty sure there isn't anyway to automatically migrate a 3030s configuration to an ASA, Correct?2)We have some old PIX 515s and 525s...