Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
O que é a Infraestrutura como serviço
by Rossana Saul -
SD-WAN load balance between MPLS and internet
by yutashimamura2920 -
Two devices with same IP adderss on two different links
by MT Engineer -
MPLS label type unknown
by fhh1 -
Cisco ACI OSPF Neighbor Failer and INIT state
by Translator -
solucionar probelma de cisco
by hectorbt -
extension mobility issues
by FLINZZY -
RIP routing table not loading routes.
by cruxcomputing
Community Activity
Cisco ACI OSPF Neighbor Failer and INIT state
I set up OSPF between Cisco ACI N9K-C93180YC-EX switch and C9300-48U switch, but Neighbor state is maintained in INIT and will not be established. I will attach the setting screen as a capture screen. Can you tell me what the problem is? Two Nexus sw...
Cisco ACI OSPF Neighbor Failer and INIT state
I set up OSPF between Cisco ACI N9K-C93180YC-EX switch and C9300-48U switch, but Neighbor state is maintained in INIT and will not be established. I will attach the setting screen as a capture screen. Can you tell me what the problem is? Two Nexus sw...
How can I Setup Email Alerts for Queue Overflow in Webex Flow Designer
We are currently evaluating Webex Contact Center as we consider transitioning away from UCCX. In our existing setup, if there are more than three people waiting in the call queue, an email is automatically sent to the supervisors to alert them. I've ...
solucionar probelma de cisco
Cordial saludodesde hace varios dias he tenido problema con la plataforma cisco no me deja abrir me aparace esto y no me deja trabajar que debo hacer
Get report status endpoint from ISE
Dear Community,There have 2 kind different of AnyConnect agent version on ISE.Also have 2 kind of Complain Module as well.There are 2 kindly of Cisco AnyConnect agent on ISE where Client Provisioning Policy. 1. AnyConnect 4.x with its Compliance Modu...
Certs in Cisco ISE
Excellent article @thomas (weird I cannot tag him),https://community.cisco.com/t5/security-knowledge-base/how-to-implement-digital-certificates-in-ise/ta-p/3630897#toc-hId--379707072I wonder if the STALE topic has been taken into account (I don't see...
extension mobility issues
First of all, this physical phone belongs to the number ending 7201. After attempting to log in for testing, it changed to the user profile instead of mine. Additionally, the Extension Mobility Service is missing in the user profile with the number e...
Cisco 3560X Capacitor Failures
Hi all,I teach at a networking academy at a community college and we have a few donated 3560X switches supplementing our student lab. Six are deployed in pods. The room has adequate climate controlIn the last 10 months we have had two fail, announcin...
RIP routing table not loading routes.
Hi Guys n Gals,I am having a bit of trouble with an assignment I am doing in packet tracer.I don't have the files handy until the eve, so will send pics/files later if required.My problem is that I have an access router connected to 3 separate cluste...
"RF Optimization" and "RF Profiles" in Mobility Express 8.10
Hardware: an ME 8.10.190.0 cluster of 3802I.If I set a customised "rf-profile" for my ap-group, does it overwrite the config made by "RF Optimization", or vice versa?Thanks!
Clients not connecting due to DHCP timeout
Hi, we have had an issue with a rollout of new AP's on site. The AP model is 9120 and the WLC is 9800 17.9.5, Switch infrastructure is 9300L on 17.09.04aWe had rolled out 109 AP's across our site with no issues however the last 3 we have activated h...
Cisco ISE "Unknown" Super Admin Member
Hi, I am tasked with the initial configuration of an ISE deployment (primary/secondary). During the AD join and enabling AD admins to access the GUI via External Identity Source I see two members in the Admin group -> Super Admin. First -> admin2 (th...
Computer Doesn't get IP from Core SW when the ACL is on
Hello All, I have a question, I built the following DHCP pool and ACL on the Cisco core. When the ACL is on the computer doesn't able to get IP address from DHCP but when I turn off the ACL it works perfectly fine. So here is the question when comput...
Resolved! Cisco ISE multiple portals login via Azure AD SAML
Hi,Is it possible to use Azure AD SAML integration for both sponsor and admin portal on the same ISE deployment (3.2, small HA)?I managed to set up sponsor portal via AAD SSO and it works great. Then I wanted to use the same feature for admin users b...
IP addresses for Firewall with HA configuration
Hi,I'll have two Firepower FPR1120-ASA-K9 that will be configured as High Availability (Active and Standby).Please let me know if they should have the same management IP address and bridged network address.Thank you in advance!Regards,Sangyeon
