Hello:Currently I have SNMP configured on all my routers and switches. The config I have used on them has been a snipit I created over 5 years ago. A lot has changed in that time... I need to reconfigure all of my devices. My goal is to use SNMP ...
LMS3.2 on Solaris 10-CiscoView is not showing the sup module in Cisco 4507R-E. Please see attached.I have Cisco 4507-R-E with SUP6LE- In 4507 you put SUP module in slot3 and 4 and I have sup in slot 3 (slot 4 is empty). I can lauch the switch in Cisc...
Hi experts,I have a dilemma here that I need to use snmpwalk and get the entire MAC address table from the switch. I'm aware that I need to use <snmp string>@<VLAN id> as the string to get the MAC address table for that VLAN.e.g. to get MAC address t...
Hi,I'd like to ask for you help. I've installed LMS 3.2 on a server with 2 NICs and we're having a problem executing Topology Service from a remote host.When I try to launch Topology-Services I get the following error:Campus Manager Error: "Cannot co...
Dear,I have LMS 3.2 on Solaris 10. When i check the syslog_info file i see many messages but nothing is coming up in the syslog report. Can anyone assist here?Thanks,Aamir
Dear,Can anyone explain what purge means in LMS 3.2 like for eg. syslog purge. Does it delete those files or makes a backup. If a backup where to find those syslog purged files?Thanks,Aamir
Hi,I have installed Ciscoworks LMS 3.2. All components ( CS, CM, RME ) work fine except DFM. I import new devices at DFM, but the import result is "Questioned - SNMP Timeout".I have increase the SNMP timeout on DFM, also use device credential verify ...
Hi:We configured LMS in ACS mode with fallback.The integration works fine, but when we try to take the ACS (4.2) down to try the fallback login in LMS, it does not work.First we try stopping ACS services, but we realized that the server answered with...
Hi all,I am trying to deploy LMS 3.2 in a client, but it receives the following error: On the Device center it shows Device Type as Unknown:The funny thing is that both devices (2) are shown OK in Chassis View but in Device Center it displays them as...
Dear,Can someone just explain the LMS 3.2 message filter option. This is how i understand it if we say Keep and status is enabled I will these syslogs in the syslog report and if we say Drop and status is enables these syslogs will not be seen in the...
In LMS 2.6 , there is a feature to forward all SNMP traps/notifications as they are received. Is there also a feature where the previously received traps/notifications in Ciscoworks can be forwarded as SNMP traps/notifications to another machine. ( ...
I am trying to setup a TCL script that will do a extended traceroute to multiple sites to test PBR changes i will be making. The script needs to take a list of IP address and run an extended traceroute to each. I need to source the traceroute from ...
ForumI am working today with an NME-NAM that we recently configured at a customer site. When setting up a Capture Filter on the NAM, there are 3 options underneath the pull down for "Capture From" which are:Internal - External - ERSPAN.I understand ...
I am trying to find the download location for the NAM strong crypto patch, as I need to reapply it. When I run the show patch command on my NAM it shows the patch as "nam-app.3-6.strong-crypto-patchK9-1-0", however I can only find the patch "nam-app....
Hello All,I am turing to the community because I have changed settings, ran the acquisition probably 15 times but to no avail. After it completes I have:Number of Acquisition:927Number of host entries:0Number of IP Phone entries:0I have tried ping sw...
