Hello All,Has anybody known which credentials and permisions have to be used for Unity Connection and Presence Server, in order to be monitored by CUOM 2.2?Thanks
Hello All,Has anybody known which credentials and permisions have to be used for Unity Connection and Presence Server, in order to be monitored by CUOM 2.2?Thanks
Right now we are runing LMS3.0 in our environment. Could I upgrade LMS 3.0 to 3.1 directly without patching LMS3.0 December? Where could find out support hareware with LMS3.0 December version?Please advice. Thanks
Hello networkers,I'm trying to do something with EEM, which I'm not quite sure is it possible to achieve with EEM version 2.3. So the basic idea is that I have two applets which role is to watch the EIGRP sessions and to take appropriate actions if s...
Hi all,I am running device credential reports to see if SNMPV2/V3 is ok and some devices are coming back wrong credentials/credentials not verified.I'm looking at the date and some are from last year Dec 1 2008 and I just applied changes to some devi...
Hi,Inventory collection fails with error is "Timed out. Make sure that ICServer is runningâ. But the ICServer process is running. I enabled debug on could see the following in the IC_Server.log which I'm not sure if it indicates any issues.I can fi...
I have LMS 2.6 running in our system.Recently, I noticed that there is no syslog display from all of dev (It was working fine before). The syslog collector status shows that most of msg have been filtered out (means the server received syslog, but fi...
Hello, I'm developing a software to monitor network traffic.I need to know if is there an snmpget that give as result quantity in MB of traffic ftp ?and is there an snmpget that give as result quantity in MB of traffic http ?I'm monitoring a CISCO 65...
Hello all,does anybody of you know whether it is possible to start a CM-DataCollection via either invoking a URL-Command or a CLI-Command?Thanks for any feedbackLothar
In topology view when I right-click a device and select Device Fault Manager > Show DFM Alert a new window opens with this link https://ciscoworks.net.okstate.edu/campus/forwardToApp.jsp?MICEcookie=E0E1165BFBEBE6E36CF6C2928DA8707D&url=DFMCL&dsu=https...
Hi,we've recently switched to QPM 4.1.2 from 3.2 (clean installation, new server), and I'm having some trouble deploying policies to some devices (2811 all using c2800nm-advipservicesk9-mz.124-15.T3.bin).From what I can tell from debug ip ssh it conn...
I am going to be moving Ciscoworks to a new server and I'd like to know if there are any articles or configuration guides that address such a migration.Thanks.
Recently we upgraded LMS from 3.0.1 to 3.2. In the old version when we setup user accounts, there was a limited amount of roles, to select. Network Operator, Network Administrator, etc. Now that ACS controls the groups to a more detailed level, do...
Hi all,I am in the process of migrating some of our devices to SNMP V3 per a network audit. Some of our devices do not support V3 only V2, what is the proper way of doing this and still be able to effectively manage devices via Ciscoworks?
Number of managed devices reported for DCR slave RME is greater than the total number of devices in the DCR.See attached screen shots.
LMS is getting Configuration backup failed for the last few days.Please find the attachment.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 05:52 PM | ||
04-23-2024 12:20 AM | ||
04-16-2024 04:45 AM | ||
04-16-2024 01:33 AM | ||
04-13-2024 12:00 PM |
User | Count |
---|---|
2 | |
2 | |
2 | |
1 | |
1 |