Network Management

Hi,We are receiving traps from our 1841 routers in our network managementtool. Cannot completely identify the MIB/OID. Receiving trap with OID:.1.3.6.1.4.9.9.41.2.0.1,.1.3.6.1Have identified up to the last 4 digits as "clogMessageGenerated" for the...

Hi,If snmp informs are enabled on the switch, and snmp logging is happeningat the server, and the switch is sending the snmp information to the server. If the link between the server and switch goes down, then the informs start getting queued up in t...

I try to discover with CUOM 2.1 an CM 7.0 on a VMWare-ESX server in our showroom. The Communications Manager state is unreachable. SNMP and HTTP Username/Pwd is correct configured in the CM and in the OM.Do anybody has an idea?Thanks for any input.Ki...

HI,It seems that a SNMP walk on a IPv6 enabled switch does not show IPV6-MIB related information. What software ver supports IPV6-MIB?The cisco Object navigator does not show any images as well :C:\>snmpwalk -v 2c -c public 10.78.136.100 1.3.6.1.2....

Hi,Job archive doesn't work. It use to work before.We have this message: CM0051 Unable to connect to ConfigMgmtSever process Cause: URN_NOT_FOUND : urn "Archive Mgmt" : Not found !! Action: Please restart ConfigMgmtSever process."pdshow seems to be o...

Hello.I have a 2960G switch that had a power-bump and reset to factory default. I am running CiscoWorks LMS 3.2 and have the configuration. How do I do a restore across the network?Thanks in advanced!

Hi,Customer has an error message when he makes a LMS backup:extract from dbbackup.log :1 error reportedRun time SQL error -- Index "Template18_5mins_TSINDEX" has invalid or duplicate index entriesValidation C:/Backup_LMS\436\upm\database\upm.db faile...

Hi, I am configuring IPM 4.1.0 in LMS 3.1 for the first time. Not able to understand how I can create userdefined operations/operation types/collectors and how can I measure my network performance. It will be very much helpful for me if anybody can p...

Hi,We have LMS 2.6 on windows 2003 server. The server run out of disk space. The disk space is use by files corexxx.log in the folder Program Files\CSCOpx\MDC\log.Is it safe to delete those files ?What is the purpose of those files ?Cheers

I am in the process of building a NOC for a global company and I would like some ideas as to what kind of software to run on it. I have 4 monitors connected to one PC running Windows 7 and I also have vmware server installed on it to run Linux apps a...

Hi,I looking for the exact mib.OID for the resources(conc-connections, bandwidth, ssl-connections rate....) that show up when doing a 'show resource usage' so I could monitor them in CACTI.I have been looking into this, but not being an expert in MIB...

i want to check the following commands on devices, which of them i can able to dosh ip interface detailsh runsh ip int briefsh ip int serial 0/1/0sh int serial 0/1/0 summarysh ip int serial 0/1/1sh int serial 0/1/1 summarysh tcpsh line clear line 0/1...

Hi,Which tool allows send script commands to many devices?For example:Add a new community SNMP to 80 Routers ..Thanks

Dear clarke,trying to upgrade the Lms Version to 3.1 with license key of 3.0, gone to the mentioned page, but i dont have contratc NO( hwere it will be)i only have PAK (product Authorization key ) how can i process this