Network Management

HiHaving some issues retrieving the full set of information from certain devices in User Tracking Reports (these devices at a remote site). I am only recieving the MAC address, devicename, ports and last seen info (missing subnet, IP address, hostnam...

Hello all,With menu Common Services > Software Center > Software Updates.I select a license 100 devices ok -> LMS is register with 100 devicesThen I select a license 300 devices ok -> LMS is register with 300 devicesThen I select the first license 10...

Can someone tell me how to license LMS 2.6. We installed LMS 2.6 on another Solaris 9 server. Migrated the data from the old server but when we tried to use the application, all modules are not licensed. How can we license LMS 2.6?

I have 2 new devices Blade switches 3020 for HP. I can't add correct this devices to CW LMS 2.6 . SNMP settings are correct, they are registered in ACS. But this devices are in Report ="Device that are not configured in ACS Report". I see my devices...

On a LMS 3.1 I have my jrm.log filled with:Test Exception is : java.sql.SQLException: JZ0S2: Statement object has already been closed.Any idea on what can be the cause and what can be done to fix.

How to control the over populated discovery devices in common services? I just want to discover the management IPs of each devices.

I am using a PIX 506E version 6.3(5) using 10.0.0.X. We recently installed a voice mail server with the ip address 10.0.0.92 and I set up a static IP map for address 66.x.x.x to allow access from the outside. My issue is that we have laptops that a...

I'm creating a template to check if OSPFv3 is authenticated. So my thinking is, not to check the interfaces for authentication if both these conditions are not met.1) The router has ospfv3 running?+ ipv6 router ospf [#.*#]2) If it exists, check the i...

Hi to all,I'm not able to walk a tunnel interface in my router, one day the tunnel came down but after the problem was solved it came up again and since that i'm not able to walk it using snmp, i have 4 other tunnels configured and those i can see th...

Hi there,i have recently integrated LMS 3.0 with ACS appliance 4.I am facing one issue,whe the ACS is down i am unable to login to the LMS with the system id user account or any other user that exists in the LMS local database. The documentation says...

Is possible to get snmp statistics (ifMIB) for interface which is in the following state:Serial is up, line protocol is down?? Or for example for SPAN destination port?? Thank you

I am trying to set up a trust relationship between to LMS servers.SRV1 with RME and CM and SRV2 with IPM and DFM.When logging on to SRV1 as admin, I run the CiscoWorks Assustan - Server Setup and procede to add in SRV2 and set the relationships. at ...

I was trying to 'fix' something in Network Discrepancy Reports and I get the following error. RME Server Credentials is not set. Please set the credentials using RME Server Credentials page.Any ideas as to what could be causing this?Thanks,Stephen