Network Management

In trying to upgrade my 2513 to 16MB Flash, the 8MB SIMM I installed in slot1 wouldn't fit unless I turned it so the chips faced backward. I'd tried this before on other routers and usually I got the "order reversed - Flash initialization failed" me...

Hi All,I am using LMS 3.0.1.there is any possibility that we can get any alert on admin desktop when some link fails.

I have read the upgrade Q&A's on OS upgrades (which there are maybe one, pretty basic) and don't see any apparent issue with running an upgrade to 2K3 with LMS 2.6 already installed. I still need to ask the forum if anybody has done this and how it w...

Dear friends,I have Ciscoworks LMS 3.0 with DFM 3.0.1.When running a Device credential verification report for our core switch in RME, it shows up as Passed but the core switch shows up in DFM as Questioned. I even changed the SNMP timeout to 10 sec ...

We have an install of CiscoWorks LMS 3.0.1 and during a recent security audit it was flagged for making the host server susceptible to directory traversal attacks via CiscoWork's TFTP service. CiscoWorks uses TFTP to pull configs and to push IOS ima...

We are trying to upgrade the image of our Cisco 3750 switch through the RME Image Management Software. We are trying to install the tar file however the image does not get loaded into the switch.I have attached the telnet.log file for reference , can...

LMS3.1,we have configured our routers to send snmp traps to LMS DFM, but unable to set snmp trap recieving port on 162,the application just keep showing this please wait msg but nothing more happens.see the screenshot.I tried restarting crmdmgtd serv...

LMS 3.1I've got the feeling that the CSDiscovery process does not take care of the flag 'Update DCR Display Name' anymore. These were the global settings used for the discovery job (no filters are in use, only CDP module, use DCR as seed and jump rou...

We have a eDirectory that we want to do the authentication.I guessed that it is possible to select the Netscape choice and just do authentication using ldap/ldaps.Is there anyone that has done this, or have any idea why it should/should not work.Rega...

I have 3 devices with cascading consolesR1 --> R2 --> R3I connect from R1 to R2 using reverse telnet.Then I make a second reverse telnet from R2 to R3.When I make the usual ctrl-shift-6 x, the link between R1 and R2 gets disconnected, but the R2/R3 r...