Hi,I'm looking for a tool for monitoring the ACE module, for example # of connections/hits, if there is some real server out-of-service ....ThanksAbd Alqader
Hi,I have a small network of around 25 cisco devices. (L2/3 switches, routers, firewalls)I am looking at a monitoring solution like CiscoWorks or HP-NNM.But I have a very tight budget and am not sure if CiscoWorks LMS is a complete over kill here. (s...
G'day mates. Hopefully you could give me some advise. I am at a customer who had LMS 2.5 installed and the server died. No-one could find the media until recently. This is all on Solaris. My problem is that the OS is 2.9 (which is required for LMS2.5...
I have two servers with the following characteristics:Server 1:Windows Server 2003 - SP1Pentium III 1133 MHz3.00 GB of RAMServer 2:Windows Server 2003 - SP2Dual 3.16 GHz Intel Xeon(R) 3.84 GB of RAMI first installed all the CW applications in Server ...
Since not all devices advertise a model type because the device has to support the ENTITY-MIB to do this. And it depends on the software version. How do you find out? I have several C2950 devices running IOS 12.1(19)EA1a and they are not reporting ...
Where can I find if this document has been updated, The title is:The Traps Sent with SNMP-Server Enabled Traps Configuredhttp://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008021de3e.shtmlI'm trying to find a complete listing of ...
I have a problem with my CiscoWorks LMS v3.1 Syslog Analyzer running on Windows 2003 server. After completing configurations on network devices to send syslog messages (infor) to the CiscoWorks Server, in the RME the Syslog Analyzer shows "No records...
Hi all,We run LMS 3.1 on Windows 2003 in a VMware environment. The size of the virtual hard drive is limited by the version of VMware that we use to 250 GB, but we can have multiple 250 GB drives.Is there a way I can change the location of some of ...
We have a large amount of 3550 switches that have recently started to fail on Inventory collection within RME. With the above error.We are running RME 4.0.6 and the switches are running IOS 12.1(13)EA1c.Is this related to the 3550 ENTITY-MIB bug that...
I am running CW LMS 3.1 on Windows.My backups are failing due to a validation error on DFNINVDB. I have attached the section of the d:\cscopx\backup\BackupInfo.txt file. Any assistance appreciated!Thanks, Rob<strong>Attachment Keywords : </strong> ...
Hi All,I need to generate a set of "show" commands daily for a group of devices, and have the text output for each device stored on a server share. For example switch 1 would have a file called switch1_show, switch 2 would have a file called switch2...
Hello Dears all,One of my customer has upgraded from a 3.0 version to LMS 3.1 , in, the major portal of LMS , he as has unusual message saying, that "License server/Daemon manager is down , please check License.log for more information.The License.l...
