Network Management

I have an issue where I have 4384 devices in Common services 3.2.0 and only 4382 (Total inc. pending, suspended, alias etc) within RME 4.2.0.Is there a maunal process I can run to get these 2 devices to RME device list - these devices credentials are...

I am trying to use the Best Practices Deviation Report to implement all Recommended fixes but when I click onto Fix i get the following errorINFO - Devices to be attempted in the job:172.16.251.34INFO - The job 1193 is createdWaiting for the job resu...

Hello, Logrot is usefull.My customer used it too in LMS 2.6.The problem is that when she wants to opened the syslog file , this is too big which can't be opened.In fact, LOGROT do well the increments, but how stop the size of each one ?Thanks

Hi,I got problem viewing the topology services. I have Campus Manager 5.1.1. I always got this error.Cannot connect to ANI server: ANIServer6.0-hostnameProbable CauseUnknown Error...Recommended ActionVerify that ANIServer6.0-hostname is running and r...

I have a LMS 2.6 which is monitoring the cisco devices. Everytime when the server switch is utilized high due to backup services there will be alert triggered. How can i set the "high utilization" to make LMS alert me when the utilization is high let...

Hello!I have simple Flexible Netflow config on 7206 router:flow exporter EXPORTER destination x.x.x.x source GigabitEthernet0/1 dscp 48 transport udp 2055flow monitor default record netflow-original exporter EXPORTERinterface GigabitEthernet0/1ip flo...

hi i have a some catalyst 2960, in my core network, but sometime any managementaccess to these devices is not possible ( telnet,ssh or console access). wheni try physical access (console) i have this log message "low on memory, try later".my cpu us...

Common services 3.0.5Windows server 2003 SP2backup schedule frequencyimmediate = okmountly = okdaily = errorweekly = errormessage = cannot schedule e:/CWdataBackup/Can you help me ? Thks

Hi all,Please tell me is there a way in LMS to know which device/IOS supports SNMP v3?Also, If a device supports SNMP v3, which authorization and private modes it supports.

The problem I am facing is accurately described in another thread in this forum, but not solved. Seehttp://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&Co...

Hi,I am facing some issues with IGMP.Working on switchs Catalyst 2960, I would like to disable IGMPv3.In fact, in the official doc: "IGMPv3 join and leave messages are not supported on switches running IGMP filtering or MVR."But I need IGMP filtering...

I realize there is not event correlation in DFM, but I am curious why I have hundreds of pages on 19 devices that went down due to a wan link. They just keep coming and coming, all have the same time and date. All events are the same (lot's of them f...