Network Management

Hi ,I am trying to configure an MRTG for cpu utilization of 6509 and 4506 switches.But the OID i am trying ( 1.3.6.1.4.1.9.2.1.58 )which i found on the net is returning errors and the graph is showing null value continiously.Can somebody help me in t...

Hi I am trying to create a poll and I am getting the following errorCannot communicate with Poller Manager Service. Check whether the UPMProcess is down.

Hi,I have lms 2.5 and dfm 2.0 SP2.When the server is running for a while, for example after 2-3 weeks, it stops showing the event details in an alert from the "Alerts and Activities" window.I have checked that devices are managed successfully in DFM,...

We have over 130 devices showing up as "Unreachable Devices" in Device Discovery of which, 60 are live and active hosts that should be discoverable. I've gone through and verified each device is online and that the credentials defined in CW work onth...

Hi,Hope someone can help me. Our LMS server suddenly stop running and when i checked the Windows 2003 Services, it shows that the Tomcat Servelt Engine is not running and failed to start, so with the Apache service, I did try to run them manualy but ...

Good DayAnyone to help with resolving a problem with Cisco LMS 3.0, I can log in to Ciscoworks but the GUI webpages are not loading. Anyone with a solution? I did not change anything from default config.My http port is still 1741.

Hi,Pls let me know the OID for monitoring CPU & Memory Utilization of 4507 switch

Hi,We have a bunch of Juniper firewalls, can we manage them from LMS3.x I have the mib's and thought I might just be able to import them ?RegardsScott

hi, I'm running LMS 2.6 and IOS ver 12.2 (45) SG on a 4506.I can't go into the port-security page to change settings or delete sticky mac address.Getting a error say I've enabled dot1x, which I didn't.we are using cisco view V6.1.5 module with Cat 4...

I have a BBSM (5.3 build release 3.0) and i want to update with the latest service pack.I installed the BBSM53SP2.exe (This service pack is also known as Patch 5325) and seems to have ended ok, but viewing Webpatch logs were found the following messa...

I have 2 router 6506 series connecting to the same management node, they both have an Identical configuration, as they are redundant of each other, with Loopback interface as the trap-source interface, the way the network is physically configured, is...

I have a Cisco 2811, configured with random sampled netflow. I have enabled NetFlow V9. In the options template, I am not seeing the SAMPLING interval field. Is there any spefic config has to be done to include the SAMPLING info in options templates...

Hi,Is it possible for LMS3.x to generate an alert and send an email when a device config changes ?.I am sure we had this in LMS 2.x but cannot find out how to do it under LMS 3.xScott