Network Management

Hi,Our client has LMS 3.0 installed to monitor their routers, switches, and firewall. Evrything seemed to work out fine except for the telnet connection when you right click on the device under Topology Services map. When you click on Telnet, a windo...

LMS 2.6 - Where can you look to determine Restricted or Unrestricted? Where could I go to determine if the version of LMS 2.6 is Restricted or Unrestricted? All I see if LMS version 2.6Thanks,Craig

Is there a known issue with RME that sometimes you can discover a device with the host name and if that doesn't works you can try using the IP address instead?

is it just me or does CW's install process stink on ice? Our machine blew chunks and had to be rebuilt. We were on 2.6 and various revisions for the modules thereof.I had the cd media for the 2.6 bundle but when I tried to install that of course it ...

My software folks pushed IE7 down to my pc in a security update. Yea! So far all the apps work ok but Campus Mgr. The display is hosed up after the java loads. Running 4.0.8 any chance I don't have to re-image my machine and go back to IE6 to get it ...

trying to install RSAC v4.1 from the LMSv3 DVD, setup launches checks timezone then throws error indicating unsupported OS.Docs specifically indicate XP with SP2 is supported.Target machine IBM S50 is P4 w/HT, 3GHz CPU with 1G RAM and 1.5G swap, 80G ...

Dear all,A few questions came up to me during investment plan CiscoWorks:- Is CiscoWorks an "64 bits" application?- The quad-core cpu's are not mentioned in the documentation! Is this CPU not supported?- The SunSparc CPU's, which mentioned in the HW ...

Hello,I have 2 new devices: 3550 and 3570. I've seen the supported devices and only Catalyst 3550 seems to be supported.What about the second one? Is there any upgrade to DFM to let it able to support Catalyst 3570?Thanks a lot,Regards

I have one device that I have successfully added to everywhere in Ciscoworks except for it won't show up in Topology services. It's in Common Services, DFM, and RME. I've rebooted the server and ran both device discovery and data collection. Pleas...

I have a router 1760 installed in a remote site with DSL, a serial link and LAN users behind it. Under normal conditions it should avoid using the DSL interface to access the Internet for security reasons. It should route all traffic via the serial...

HiI have installed and configured LMS 2.6 in windows 2003 machine. It was working fine but now Iam not able to login through IE. i was accessing it through http://a.b.c.d:1741 but now it shows page cannot be displayed error. i tried restaring the ser...

Hi,we're running catalyst 3750 stacks with different stack members. These stack members need different IOS Software, for example:WS-C3750E-24TD 12.2(44)SE C3750E-UNIVERSALK9-M WS-C3750G-24PS 12.2(44)SE C3750-IPBASEK9-MLet us ...

I have 2 Netconfig RME jobs that either indicate they are running or have a stop initiated status. They have been this was for hours. Is there some way to purge them?I receive an error message when I attempt to delete them.ThanksJamie