Network Management

I have 2 cisco 1800 routers.I have a fiber channel that link my to networks, I have other two routers that is backup and I use a hsrp to monitor it.The problem, when one side of the fiber channel router down, the other continue up. I use static route...

Hi, i have running ciscoworks lms for managing a multi-sites network.Each site is connect to principal site via my service provider.I registry all my devices (routers, switch)in the lms but i don't have any information about service provider's device...

I am applying the DST patch 3.0 on LMS 2.5.1I turned off manually all ciscoworks services, but when it comes to IPM, I get the following message:Could not stop the IPM PM Server on Local ComputerError 1053: The service did not respond to the start or...

I am new to CiscoWorks. The product running is CiscoWorks 2000 but has never really been setup. Is there a good how to source (step by step) that I can access or download. I would like to monitor our internal routers and switches and get paged whe...

I'm running Ciscoworks 2.5.1 with RME 4.0.4 on Windows Server 2003 SP1. On numerous Cat3500s and Cat4500s the software management in RME will successfully load the new IOS image and update the bootvar, but will always fail to reboot with the error co...

I need to be able to generate either sn SNMP trap or a syslog message when ever someone logs into or out of a IOS router or switch. This is for successful logins.outs.

Should "show proc cpu history" match ((cpmCPUTotal5min))/deltaTime? If snmpwalk sees two CPUs, is CPU 1 the active SUP's CPU while CPU 2 is the standby SUP's CPU?

i installed WAAS software 4.0.1.16, but when i give the cammand > wass_cm(config)#central-mamger role primary it give me an error saying cfg/ad/rpc/maxclientcdm: Item Not Found. (Error 4) cfg/cms/messaging/CdmDispatcherCount: Item Not Found. (Error 4...

I have installed in a Solaris 8 Server The LMS ver. 2.2 and i want to know if the common services 2.2 SP2 and RME 3.5 can support the SNMPv3, i mean if i can do all the network management in SNMPv3?Because i need to do all the discovery and trap proc...

Hi, have a problem when I add a device of type CE500, it seems that LMS 2,5 that I am using does not have support for this device. I verify the "Device Credential Verification" and consists that it did not get success to have access this device, nor ...

I understand that RME 3.5 should be included in VMS 2.3, am I right? If that is true, what should I do if the RME installation file is missing from both CDs?Installation guide says the following:"The top level directory should contain three .exe file...

Hello! As I see in the devices table, Catalyst 4503 IOS with SupII is not supported by DFM, and VLAN Management in Campus Manager either. Is there or is it planned any patch or update for whole LMS or these applications to get support of this device?...

I have installed and Configured Cisco Unified Operations Manager 1.1 I am able to see my devices in the Service Level View, but I am not seeing any alerts or events on my alerts and events viewer. I have had it running for a week now and expected t...