Network Management

I have a not-so newly installed LMS4.2 Linux appliance. Here is my configuration archive summary:Config Archival Status No. of Devices Successful 7 Failed 1338 Partially Successful0 Total1345 Configuration Never Collected 1338 So I look up a device...

Hi All,I have configured LMS to forward traps to my NMS tool. Now the issue is, we are getting all kind of traps from the device.1. I need only specific traps to be forwarded from my LMS. 2. Also there are some switches, wherein i have disbaled "SNMP...

Hello community,Could anyone tell me whether this router model is using the "transmit diversity " or the "spatial multiplexing" for MIMO?Thank you.Roxana

Hi Experts, we have LMS 4.0 and we found one problem that some network switches data are not able to fetch with LMS.what could be the reason to happen this type of problem?please assist with best solution to resolve this issue.. Suhas B.

Dear Cisco,We are still encountering problems when incorporating a new device type (Cisco Catalyst 3560C-8PC-S Switch) into Ciscoworks common services.Yesterday, we installed the latest DeviceData.xml 3.6) file, and now the OID 1.3.6.1.4.1.9.1.1466 i...

Hi guys,Just setup a small but useful Remote Access VPN accounting script:event manager applet VPN_Accounting_UP  event syslog pattern "%CRYPTO-5-SESSION_STATUS: Crypto tunnel is UP" action 1.0 cli command "enable" action 1.2 cli command "show clock ...

Any ideas on what I can do to get this patch to install? I've burned like 60 hrs in the last week with trying to get from 1.2 to 2.1 - involving patching 1.2, upgrading to 1.3, now patching 1.3 update 4 and stuck... Help? hiacncsapv01/admin# patch in...

Hello all,I'm trying to monitor BGP sessions, and I need to distinguish where I am getting routes from.There are multiple sites advertising routes to our network and we use communities to identify them as a code number.I'm able to get the received ro...

I asked this question here, on ServerFault, and they guided me to here.The issue is basic. If I need to run hundreds of al/ag/ng/no commands on a Cisco ASA programmatically, I need to do it via a SSH shell, with the restriction that the ASA will not ...

Hello All, I am configuring high availability for two prime infrastructure 2.1 servers. I have configured manual HA between the servers. I need to know what will be the configuration in the devices ( switches,routers etc.) for proper working of the H...