Hi Everyone, Customer has recently installed PI 1.3 software, and then used it to back up or restore devices' config. However, when imported all devices into PI 1.3 by csv template and set up some setting about schedule daily job of configurati...
Dear allI know LSM 3.2 need license of HUM (Health and Utilization Monitor) for monitor history data on interface. I want to know whether LMS 4.2 can monitor graphic traffic in the interface within 1-3 month? If so, how to run? does it has any licens...
Hi team:I installed a CPI of 1.3, but when I connect, I received the following message: "The system is running out of disk space, see the online help to perform disk cleanup" I have the following patches installed but the problems persist.Patch: Cisc...
Dear teamour customer have existing license prime infrasturcture version 1.2, he want to add 150 license for assurance licensewhat the part number license for purchase the licensethanksYusuf
Hi, It shows the PI login to the managed devices and run configure commands during daily inventory task. Is it poosible to know what the commands will be run in the Inventory task?ThanksTao
We receive a lot of interface events and alarms from our 3560s access ports. We have not deployed any interface monitoring yet but still hundreds of alarms and events warns us about interfaces going up and down. Anyone who know why Prime is monitorin...
I have a Cisco 4510R switch which by cisco documentaions support Netflow protocol... when i am trying to configure the netflow using the documented commands like ip flow ingress, egress ...etc gives me unrecognized command for all commands.any help i...
Hi,Software version : Cisco Prime Infrastructure 2.0 (2.0.0.0.294)Problem description :When doing "Configurationi Archives", it shows "No device package found for the specified device".But check detail in "Device Level Support", ASR should be support...
hi,i have following scenario on a router:ip dhcp pool VOBvrf VOBnetwork 10.255.150.0 255.255.255.248next-server 10.1.1.1bootfile xx/xx/macdefault-router 10.255.150.1 domain-name xx.xx is it possible to response the dhcp client with the bootfile dynam...
Hi,I´ve added two Nexus 7004 chassis (SUP2) to PI2.0, but they`re shown as unsupported devices. I´ve checked the supported device list and in fact there is no support for the 7004 chassis, but all the other chassis (7009, 7010, 7018) are on the list....
Hello. Disappeared access to the web interface. Here is what the system:#pdshow Apache Process= Apache State = Administrator has shut down this server Pid = 0 RC = 0 Signo = 0 Start = 11/27/13 12:52...
How can I use or achieve the goal of Service Level Agreement (SLA) of 99.99% network availability using Cisco Prime Infrastructure..there is a documentation related..?What are the best practices..thanksDiego Prada
Hi,I'm using a 16 port chase IOLAN comms server to access the console of a number of routers and switches. I managed to find the instructional manual online here: http://www.filibeto.org/sun/lib/nonsun/iolan/iolanman.pdfI'm experencing a strange issu...
