VPN

HiWhen trying to do a cut-n-paste enrollment of a cisco 3725 router with a microsoft windows server 2003 CA i get the following error on the CA.Certificate Services denied request 8675 because The request subject name is invalid or too long. 0x800940...

Hello, I have an ASA 5500 series and am looking to set up the AnyConnect VPN. Looking at this guide everything seems fairly straightforward. However, on the inside private network DHCP is setup and I was wondering if it was possible to just use DHCP ...

Hi guys, I recently set up the Cisco EasyVPN server on an 891 router and have been testing it with my iphone. It works quickly and flawlessly on my iphone - as soon as i turn the VPN setting on it asks me for my user name and password then instantly ...

Hi All ,           I have S2S tunnel  established between Customer HO to our development center , Inside interface of my firewall is connected to an L3 switch , In this L3 switch , I have 2 ,No's of SVI Vlan defined ,Frist VLAN 10 user ll get IP addr...

Hi, i have a site to site vpn stablished, the vpn works fine (while is up), i have a cisco asa 5520 and the other end of the vpn is a jupiter device that for technical reasons needs to send a continuos ping and when it does not receive a reponse back...

Hello!We are moving from an ASA to IOS routers for our site to site VPN tunnels.  On the ASA we have several tunnels set up as "Answer-Only".   How do I configure this same setting on the IOS router?  It isn't jumping out at me as an option in the cr...

I'm using ASDM v1.5(20) to access my ASA 5510 remotely.  I get the error "Unexpected end of file from server".  It appears that I have upgraded my java environment and ASDM doesn't like it.  What can I do.  I can't tell you what firmware version I'm ...

Hello,I am writing this message on the forum because I get some difficulties to configure the Cisco SRP547W. With another router (other brand) I do not have any problems. The SRP547W can contact Internet (ping OK  for the 1st gateway or Google websit...

I have an ASA running 8.4.1.  VPN using anyconnect/smartcards (microsoft certs) works without any issues.I'm trying to get iphones to be able to VPN with certs/anyconnect and it works (sort of)....    After I import the USER cert (.pfx) onto the ipho...

I have a large MPLS fully meshed network with two main locations, both of which have an ASA with internet access as well as the MPLS access.  I need to be able to provide a backup connection between the two main locations in the event one of the MPLS...

Hi All,I am facing a serious issue,after disconnecting CISCO VPN (Cisco anyconnect vpn client ,Ver- 2.5.1025 ) my internet connection and RDP will stop.I am using Windows7 -32 bit operating system.Whenever I disable and enable the NIC ,internet will ...

Hi,I'm using an ASA version 8.4.2 and a Radius Server.Is-it possible to configure ASA for sending the name of the connection profile to the Radius Server ?By default, the radius server doesn't receive this information.Thanks,Jeff

I am using a Cisco ASA 5510. Our tunnels always drop due to inactivity, which is a security issue I understand, and it only takes some "interesting traffic" to bring it back up. My problem is that it looks like the interesting traffic has to originat...

Hi Everyone,    I have my split tunnel vpn working well but I need to make an adjustment. We have a few systems in the "cloud" and we only allow access from our corporate WAN IP to those servers. I need to be able to access those servers via VPN conn...