VPN

I use the cisco-vpn client(4.6) on linux. Although I set SaveUserPassword=1 and set the UserPassword option, after the first logon the enc_UserPassword is not set. The Profile file is chmoded with 777 so this error occures not because of file access ...

Hi,I have a site to site tunnel,I have IP phones on both site A and site B trying to connect to a call manager. Site A router has 2 wan link, link 1 for site2site tunnel to site B and the link 2 to connect to call manager. Site A phones will nat out ...

I have numerous working IPSec VPNs on a PIX 515E. Once of those works a bit slow. The engineer at the remote end changed his MTU size to handle the outbound fragmentation and the performance increased a little. He wants me to change my side as well. ...

Hi,We have a PIX 525 FW is IOS Ver. 6.3. We are using a 172.x.x.x network in our LAN. We need to establish a VPN tunnel from our firewall to one of our clients firewall. Our client is ready to allow access to his network only if our private ip ad...

Hello,I Currently have a pix 515 running l2l VPN with a pix 501 and ra VPN with cisco vpn-clients.Is there a way to let clients on the l2l and the ra vpn sites access a server on the DMZ on the pix515 ? preferrably by a static NAT, so the ip-address ...

Hello,I am checking some debug messages and fell over the ones below (sorry for the long debug).What really puzzles me, is that the router builds a new ISAKMP and then a little time later he tears it down again.Nov 24 12:23:12.017: ISAKMP: set new no...

Network have a central site with two ASA and 30 branch offices(10-15 people)(each has 5 agencies(4-5 people)). There is requiremets for IP Telephiny.Can I build my network with DMVPN using ASA? Does ASA support DMVPN? If no, can you give me some reco...

Hi,Does anyone knows what is the licensing practice for the Websense appliance? If I purchased 6 appliances, can I just apply the license for 1 unit? Is the license refer to the number of appliance or by registered user?Rgds.

Hi,I have set up a VPN Concentrator for remote access using the Cisco VPN Client and all works fine in connection. To tighten security I am using rules and filters on the interfaces.Everytime I apply the default 'IPSEC-ESP In' rule to the Public inte...

We have VPN Concentrator 3005. I want to upgrade the software on the VPN Concentrator. The existing version is 3.6.7.A with software vpn3005-3.6.7.A-k9.bin. I have already downloaded version 4.7.2.B with software vpn3005-4.7.2.B-k9.binDo you see a...

Is it possible to deploy ROUTER Failover mechanism on CISCO Router 3725 same like PIX F/W Failover mechanism ?

Hi All,We are running DMVPN EIGRP topology in our network. The DMVPN hub aggregates all the spoke router networks via the tunnel. ALso the Spoke routers allow internet traffic by using NAT and only private traffic flows through the DMVPN tunnel. The ...

When users vpn in from external using a TCP based connection they drop after a couple of minutes. They don't have the same problem when using udp. The error message is 412 and it states. Secure VPN connection terminated locally by the client.Reaso...

I have a CISCO 831 Router, and I have been asked to connect a VPN Tunnel using 3DES (not GRE). I'm only experienced with GRE and am a little lost! Any explainations, suggestions, or help welcome! Sample Config files would be great!

I have to set up a VPN tunnel between pix 535 and cisco vpn concentrator 3000 series.There is a problem on the pix 535 side. No packets are being encrypted and sent to the vpn concentrator's end.Pix has multiple SA's for the same tunnel on PIX. Packe...