Does anyone know if its possible to run a .tcl script via snmp. Would like to write a scripts to add or delete a route and it needs to be able to be run by someone with priv level 1 access or from a network manager.
Hello,I have a 7507 with IOS (tm) RSP Software (RSP-K4PV-M), Version 12.0(32)S5, RELEASE SOFTWARE (fc2.I have "ip route-cache flow input" enabled on several ports but when I view "sho ip cache flow" I only see flows from certain ports.In particular t...
Hi,I need a report from Campus Manager or RME where I could see the status from some specific ports that I have to choose.Is there any report preconfigured that I can use? I don't find anything that can help me...Or is it possible to define a report ...
I am getting reports of 0 records when running reports on at least one switch that is sending data to LMS. RME version is 4.1.1. I've viewed syslog.log and it contains the messages from the switch. I've disabled all message filters but still get n...
I have 28xx router in DFM it is being monitored for it's WAN and uplink interfaces. ALL other interfaces have been set to false in the detailed device view, as we have an ISDN PRI for CCME installed on this router. The PRI interfaces have been set ...
Hi,we're going to install a LMS with HUM for 5000 devices. We can see in the hardware requirements doc that "HUM and CS must be installed in a standalone server, which manages 1000 devices".My questions are:1- And the other 4000 devices?2- Is it mand...
Hi there,are there any possiblities to copy own-created views with configured portlets to other CW2k-Users.Docs only describe copy views within one users portal.Thanks for any feedback.Lothar
Hi Experts,I have recently configured another new event set to minimize the alerts received and configured the already running notification group to run on the new event set.However, I am still continue to receive the unwanted alerts. Do I have to re...
Hi all,Some of the below given processes are not running and if we manually enable it, after sometime it is again goes to disable state."LMS Processes like CTMJrmServer, DFMCTMStartup, DataPurge are down."2)Log files EDS-GCF.log, jrm.log, dmgtDbg.log...
Cisco Works LMS network discovery is not finding all of my network devices and I'm a bit concerned with it walking my WAN connections. I already have a list of all of my managed devices defined in my ACS server. Is there a way to import the network d...
Hi, The following query is to see which low/zero cost solution can be used for a simple up/down ICMP monitor. We do have a major instance of solarwinds, hpov, cw etc at our primary DC.But, thinking about a very lowscale monitor that does just basic p...
Hi,in the past we successfully used the product alert tool to monitor eols and field notices of our cisco equipment.pat informed us event-triggered via email when there where any eols or field notices.Several days ago I tried the new cisco notificati...
