Network Management

we are using external user DB to log into the Network devices to do authenetication.I want set enable password on the ACS for the external users, I found from ACS server configuration page:"Configure Enable Password Behaviour:For newly created dynami...

I got a problem when installing the CM sybase bundled on Solaris 10 . I couldn't install the Sybase database,the error is "Extracting dist file to /usr/tmp/sybinstall1776...doneRunning Sybase installer - this will take a while...-bash: /usr/tmp/sybin...

Hi,Does Cisco make publicly available network simulation software (routers, firewalls and so on)?

Hi,We have a script to check the isdn status after removing from backup, so as to check whether the same is getting fired or not (from the archived output). Can anybody please help me with the same? This has to be done for a large number of devices e...

Hi,we have a LMS 2.6 over Windows and we have some 2660 devices. If we take a look to one of them in CiscoView and make double-click in the port 37, it shows "FastEthernet 0/39" in the description field and it appears in red (down) when really it's u...

Dear All,Could u give me the correct NMS software to manage ASA5520, CAT switches,and CSS 11503 to be managed all together using that management software.Thanksswami

Hi: I'm working with IPM 2.6 actually, i configured a collectors and i can see the Statistics Graphics, but when i trie to see the realtime statistics graphics the following error appears:Cannot start the real time poller.Check whether Source Device ...

Hi,we have an LMS 2.6 installed on a Windows server and it cannot fetch the configs from some devices. These devices are:- 1 3560E- 1 HP WS-CBS3020-HPQ- 1 6500I have been searching through the forum looking for some solution but I have found noone.We...

Hi I don't know if somebody here work with NetManager, but I try to evaluate this product to know if its good enough.I actually install the evaluation 1.0 software on a windows 2003 server. It work fine but like the bug ID : CSCsl12370 I have some pr...

hello,how can i start Online Diagnostics using SNMP? I looked at DIAG MIBs, but could not find anything. There was something in BASIS-ONLINE-DIAG-MIB, but it does not say which IOS version has it.thanks,

I am working in a small company with 70% of PCS and 30% Macs. Currently the place has got about 350 computers with 1700 users. Recently i used a special network monitoring software called wireshark to monitor the network. Wireshark gives me a clear p...

Hi,I installed Ciscoworks LMS 3.0 on our client's server and upon login I installed the Java Plug-in from Topology services. It did work and I was able to view the topology of the devices that I have discovered. Problem is when I updated the applicat...

I have a new server that I want to load LMS 2.6 on. The cd's that I have are the full version of LMS 2.5 and the upgrade cd to 2.6. My question is do I still need to load the LMS 2.5 full version befor loading the LMS 2.6?Thank you,