Network Management

Is it possible to integrate a single cluster of LMS 3.X with more than a single 3rd party NMS at the same time ?I've got two rather large installations of HP Openview and CA Spectrum which are useful for very different things but both would benefit f...

in LMS 2.6 under" Common Service - Server - Security - Cisco.com Connection Management" i could enter the CCO user and password, but in 3.0.1 not, where could it be entered now? i added two screenshots to view the differntregardsAlex

He Experts,does some one is able to explain me how to work with the LMS 2.6 DFM Groups with summary of snmp settings. As example on the switch I configure on uplink interfaces snmp trap link-status, on access-port no snmp link-status and globally snm...

HiMy 2501 router boots and comes to a mode where the prompt looks like this:Router(boot)>I have very limited commands available in this mode. Can someone please let me know how to go back to normal mode and what this mode is?Thanks in advance!

Hi,i have installed LMS 3.0 in the network at the DMZ-2 zone of Firewall,its not giving the topology view of ASA 5520 although iam able to ping and telnet ASA ,with this it is showing the devices without any connection giving a CHKDSK UTILITY ERROR....

I am querying 1.3.6.1.2.1.17.4.3.1.1 but it's only giving me the MAC addresses based on the VLAN I specify in my community string (Public@1). Is there another OID that gives me all MAC addresses or am I stuck discovering all the VLANS on a switch and...

IEV 5.2 does not show correct local time for Router IOS IPS device. Router has correct local time, logs appear to have correct timestamp, syslog server receiving data shows correct timestamp in native logs.Related Router Commands:service timestamps ...

I need to generate a Hardware or Software Inventory with device hostnames. How do i go about it.

Hi,NetFlow v9 Templates that I used to receive last month also had corresponding data flowsets. But today the templates did not have any matching data flowsets. So the netflow monitoring has failed for me. Can someone tell me why this has started hap...

Hi,My networkt environment have Cisco and Enterasys devices and I'd like monitor all devices by Ciscoworks.Anyone know how do I import other non-cisco MIBS devices into Ciscoworks?

Hi there, i have a high cpu problem in cisco 7609. I have excluded the ip.21,ip.22 and at to stop the nms from polling the routing table and the arp table, but the high cpu load still goes on. I have sniffed a huge number of get-request from some NMS...