I have two cisco server, if i adjust the slave server in mode slave i become the following errorError in configuring the slave because Domain IDs of this machine and Master are same
anyone knows there is event correlation in ciscoworks LMS 2.6. such as one port down and other ports which are connected to that port down as well.in this case,LMS 2.6 is showing all ports down and not drill down to root cause.so,is there any event c...
Is there any way to optimize cisco 6500 netflow data export...Or any of you running Arbor's peakflow? They claim they have done Optimized flow receiving for Cisco 6500..Can you explain what is that?
I have successfully migrated data to a new server to have more drive space. The problem that I am currently running into is that on the old server all devices are normal (green). On the new server that I have done the restore on, I have a mix of ha...
I have archive set up for nightly archiveing of config and it is successful.Purging of records is set up to maintain 10 versions and not to purge for 26 weeks, but when I look at the version tree, I only see 1 version which is the latest version of t...
I am in the process of removing the IP address's from VLAN 1 and configuring a new IP address on VLN 2 as part of a security initiative.The network consists of a 6513 at the core and a bunch of 3560's and 2940's direclty connectd to the core switch.A...
I am trying to get a better understanding of what is meant by ACTIVATIONS in the licences section of ISC. At the moment we have an ACTIVATION limit of 3000 and the licence window says 2600 used which are comprised of 2600 L3MPLS/VPNs. We do not have ...
Dear AllWhen I show DFM in ciscoworks it show that there is alert id 00000SQ How can I know what is the meaning of this errorI need it urgent please B.R
Hi all,I have configured a IPSEC VPN between 2 routers which are connected through a E1 line. Of course i don't want to encrpyt everything so I've set up a policy to just include certain addresses. Out of that range of addresses I would like to exclu...
I was checking to see why the Inventory Collection "failed" after scanning only 48 devices, even though no specific device was shown as "failed".Start Time: Aug 22 2007 22:33:05 EDT End Time: Aug 23 2007 04:06:37 EDT Duration: 5 hours, 33 minutes, 30...
Hey all. I was trying to delete a recently added line to acl 101. I copied acl 101 to notepad, removed the line..Did a no access-list 101 on the PIX 515, then copied in my corrected acl into the PIX.After an hour of searching, I found that removing...
hello all Im in the process of upgrading the nam module to a new version of software and the image I was trying to go to is c6svc-nam.3-6-1a.bin.gz. The FTP process finished then when the install started the below error comes. I have researched for h...
Can the RME 3.5 inventory database be exported to a file w/ no human intervention? I.E not using the GUI-The reason I ask is the Unix team has a script that exports the database to a file then does a comparison against another database dump. The di...
Hi everyone,I have a question about how HSRP works.I have two routers, A and B, running IOS 12.4, and tracking on an ICMP Echo. (relevant configs for both routers below). From what I have read so far, I am under the impression that as soon as the tra...
It started after upgrade to CM4.0.9 and ANI db reinit.Versions are:1. CiscoWorks Common Services 3.0.5 18 Jan 2007, 12:08:37 GMT 2. Campus Manager 4.0.9 21 Aug 2007, 15:24:48 GMT 3. CiscoView 6.1.5 18 Jan 2007, 12:08:44 GMT 4. Device Fault Manage...
