Using the Chasis view on CiscoView, I cannot seem to change VLAN on ports on a Cat 4510R. Is there any reason why? And how can i go about doing this?I can do it on a Cat 6509.Thanks
I started CiscoWorks with CS3.0, RME4.0 and Campus 4.0 on Solaris 9 SUNW,UltraSPARC-II. and then I upgraded all the way to the follwoing1. CiscoWorks Common Services 3.0.5 17 Nov 2006, 07:41:24 EST 2. CiscoView 6.1.5 17 Nov 2006, 07:41:24 EST 3. I...
We were assigned a block of 5 IP addresses to use from our Internet Service Provider and recently had to request another block of 5 IP's. We are using a Cisco Series 1800 router and have access to it remotely via a browser/gui. Unfortunately when t...
We are having an issue retrieving configs from a set of 6500 switches. These devices are not accessable through telnet or ssh directly, but we do have snmp access to the devices, and TFTP access back to our Ciscoworks server. We have our Configurat...
This is on a 7206 router with code c7200-ik9s-mz.123-16.bin, and the following debugs:debug snmp packetsdebug snmp requestsMay 9 07:55:55.625: SNMP: Packet received via UDP from 164.72.43.30 on GigabitEthernet0/2May 9 07:55:55.625: SNMP: Get reques...
I am using EEM to monitor an IOD. The first applet returns a value _snmp_oid_val. I would like to use this value in another applet. How can I pass values between applets?event manager applet web1-UP event snmp oid 1.3.6.1.4.1.9.9.42.1.5.1.1.7.336 ge...
Hi forum,a costumer of mine got the following Message forwarded from DFM notifier:- Major Mo 04 01 04:53:59 itnm10002.net DFM-Alarm: Node regf_2.net (x.x.x.x), Switches and Hubs, 3 - Critical, Error in getting alert descriptionWhat does the "3 - Crit...
Hi,I have a LMS 2.6, in which I am able to archive the configurations of the devices except for a few which are partially archived and gives an error.I have attached the snapshot of the error message.can someone help me on this.thanks in advance
Any idea how can i stop (without deleting device from CS) E.g. only one device polling from all LMS bundle parts.(Common Service, Campus Manager, RME, DFM) ThanksJuha
Hi!I've just started to explore the excellent system with the archive function in Cisco switches, and my setup looks like this:archive log config logging enable logging size 500 notify syslog hidekeysAnd when using telnet to control the switch it...
What do other people do before deleting a device from CiscoWorks?For example, in our network, we upgrade devices from time to time (as I presume all people do). The new device gets added, and we we remove the old device. What do people do to archive ...
When I try to export inventory a CSV file /opt/CSCOpx, I get the error"File name should be between 1 and 255 characters" I go in and create a file and call it file1 and redo the operation and then I get the following error"Either you have not selecte...
Hi to all!How I can remove a wrong license from Cisco Security Manager Client (CSM 3.0 on windows 2003 server).I had installed a license about another CSM serverThanks!
Is there a show command or OID I can query to see what model of power supplies are installed in 7500 series rtrs running 12.1(7)E?It doesn't appear RME 3.5 can rpt on these w/ the detailed device rpt or using cwexport....
