Other Security Subjects

I have a been having problems setting up a LAN-to-LAN IPSec tunnel between Cisco Router 181X and a Cisco VPN Concentrator 300. All configuration are correct but, the tunnels fails to pass IKE Phase 1. IKE status remains at MM_NO_STATE.Viewing my debu...

Hai this is gokulakrishnan , i want toknow whether there is any way getting any alerts when a new mac-addresses joined to our networks..we use 4500 & 6500 series catalysts...Regards...Gokulakrishnan.

Does anyone know when there will be an update for the CSA 5.2, now that CSA 6 is around the corner? Or has anyone run into problems with SP3, which is marked as unsupported in the management?

I removed all instances of Dot1x on my Cat3560. I keep getting alerts from Cisco Works. I am now keep getting alerts in Cisco Works. The below is a sh logging on the switch. It is getting the same error below on random ports at random times.Any ideas...

Dear, Who can help me how netscree fw command change to ASA5510 , dose any converter software can do it ?

I posted my question here:http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&type=Subscriptions&loc=.2cc09a18/1&forum=Security&topic=Intrusion%20Prevention%20Systems%2FIDSThe network topology is:http://mitechnologiesinc.com/mit-network-diagr...

Can anyone tell me if the Websense Hosted Web Security product (not Enterprise) works okay with Cisco IOS?Thanks.

Hello All,I'm curious if anyone who has enabled port-security has experienced this issue. I've enabled port-security on some distribution switches. Two of those switches are connected for redundancy. On a few occassions, I have seen port-security ...

One of our routers in the multicast path is doing NAT. The router on the outside cannot build a PIM neighbourship with the router which has NAT configured on it. What is the problem? Have you some examples of working multicast through a NATd router?

Hello All, Does anyone know which rules in CS-MARS or Which Rule group is associated with Netflow. i.e. which rule or rules will trigger an incident when a Netflow Event is detected?

Hi, All!Sorry for my bad english =)I have a small network 10.15.0.0 /24Cisco is a gateway and DHCP server for internal network.ISP link is directly connected to fa4I've been requested to configure PPTP server on this device for remote usersConfig is...

In MARS we have a graphical layout of our network and athe things being monitored.When the routers to our branch routers are shown, since the the serial interfaces are on two host point to point networks, the serial interface is connected to a cloud....

dear sirI have Remote IPSec VPN configured on ASA5510, but we need to lets a VPN client send IPSec-protected traffic to another VPN user, something called "hairpinning", anyway, I've configured following the manual:1,same-security-traffic permit intr...