Other Security Subjects

I have a customer that wants the use a failover pair of Cisco ASA firewall's and have 2 ISP links from different ISP?s. One link will be a primary link for all web traffic, and in the event of this failing they want to use the secondary ISP link for ...

Hello gentlemen,I have 2 pix-firewall 515-E installed in a unacessible room (for now!!!) that forward all traffic (via internet and intranet).The primary pix is power-off (probably the cause of break-out has damaged it) and network traffic is forward...

Hii want to allow inbound call initiation for blueface through our FWSM. I have fixup sip 5060 configured - I assume I need to allow UDP port 5060 on my inbound access-list as well, yes? Do I need to allow TCP 5060 as well?thanks for any help.

I have a problem with a customer who authenticates all of his outbound http and https traffic on a proxy. I need for our software to connect outbound from his network on tcp port 44444, and then map that tcp port to 443 on my network before is hits ...

I've seen this discussed several times in regard to a CSS Appliance, however I was unable to find out if the SSL Module will support a Wildcard Certificate.Thanks in advance.

I have recently installed a UR version of CW VMS 2.3. When I go to the IDS MC>Devices>Sensor, I get an error message Problem with File /WEB-INF/screens/sensor.jsp!!!null. I am not able to define the sensors. As anyone seen this? The platform is W2K S...

I am trying to troubleshoot something using an accesslist to monitor traffic between two devices. One device is on my local network the other is out on the internet. When I turn on logging for my ACL rule I see my traffice appear when I do a sh log. ...

I am trying to figure out how to use NAT Redirection (that's what it's called on Linksys routers) on a Cisco 806.I need for my inside host to be able to access my inside servers using the OUTSIDE address.For instance, from my PC at 10.232.1.50 I need...

Hi,I need some advice here. I am trying to configure a router for access privileges.Following is the configuration:-enable secret level 14 5 $1$yQtt$0yL38AHKDnpuLO3MMaGi3/privilege configure level 14 interfaceprivilege configure level 14 interface sh...

We have a IPSec VPN tunnel using a PIX and a client's checkpoint. I just added an IP address to allow them to FTP to an internal server but they say its not working. We've had the tunnel and have been routing for a couple years so only the recently...

I have a really simple config that I would like to add a DMZ to, if possible.Currently, I have a 2821 between my local LAN and the Internet. Here's how it is connected:Gi0/0 (10.254.1.1) goes to LAN Core (10.254.1.2)Gi0/1 (a.b.c.d) goes out to Inter...

i have a Mon-Server inside my LAN that collect SNMP data from my network .also it use ping to test the device avilabilty . my senario : i Mon-Server is able to collect SNMP from router behinde PIX ( outside-sahci ) interface but it cannot ping it . g...

Hello, I'm trying to find what is causing VPN users to not be able to connect to their PC name via Remote Desktop by PC name. They are using DHCP internally via the PIX and when there IP changes they have to know what it changed to to connect rather ...

Hi,I need some help here. I am trying to configure a router for access privileges.Following is the configuration:-enable secret level xxxprivilege configure level 14 interfaceprivilege configure level 14 interface shutdownprivilege configure level 14...