Try to telnet a web server located in a LAN: telnet 192.168.1.2 80 but it failed. I tried this even on the server itself, i.e., on the server, telnet 192.168.1.2 80 and it still failed. What is wrong and how to resolve it? Thanks to help. Scott
Hi,I have an ASA 5500 running IOS 7.0. I am using three interfaces INSIDE, OUTSIDE and DMZ. INSIDE users (10.10.10.x) ger PAT'd to 12.12.12.12 address when going from the INSIDE to the OUTSIDE.Can I use the same address (12.12.12.12) to PAT the INI...
I have a 1721 router, and a 506E firewall with NAT.Inside the network, we have a machine in which we wish to telnet into from the outside world. I have the router setup with static NAT so that machine has a public IP.I can ping that public IP succes...
I am trying to connect two sites with VPN 3000 concentrators and IPSec tunnel. I've done this several times with other clients sucessfully but not this time. I get this strange IKE error in phase 1."received an unencrypted packet when crypto active!!...
Hi; I have several Windows 2000 servers in my DMZ. My NT admin is asking that I open up communication from his "inside" HP Insight Manager server to these DMZ Windows 2000 servers. The ports from what I gather are these:7 for ping 161 and 162 for SNM...
Trying to connect a linux box to our 3015 concentrator via webvpn. Logs in okay, but when application access is started its window shows loopback addresses instead of the proper port forwards, and it cannot connect. This webvpn group has worked...
I have the following setup:PC---fa0/0-Router1-fa0/1----fa0/0-Router2-fa0/1---PCand am trying to get 6to4 tunnels happening between the two routers butto no avail. I believe its something in the route in place but for thelife of me I cant spot the err...
Hi All,I have a number of 1720s, but, I can't get the "no crypto isakmp enable" cmd, which tells me I can't do VPN on these routers. Below is the IOS ver of 1.IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(15)T2, RELEASE SOFTWARE (fc2)Is it a spe...
This is Deniz Pecel from Turkey. We are having a strange problem in here and I decided to ask for your advice about situation. First of all we have a L/L connection to a customer side. Connection is over hdlc and real IP. After that from the same rou...
In a full redundant environemnt, i.e. two gateway routers, two cores, two distributions, we would like to put two FWSM on two cores in transparent mode, while the outbound traffic might take left-hand side dist-core-gateway while the inbound response...
The resouce says: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml#topic9 states: "IP addresses in the pool of global addresses specified with the global command require reverse DNS entries to ensure that...
Hi to All,I have just purchased Cisco PIX 506E Firewall.We have approx. 30 workstations with static IP's on internal LAN. They all have RAdmin software installed. I also created an user account on PIX for remote access for one of ours employee. He ac...
I am having trouble upgrading fwsm from 2.2.2 to 2.2.3. It is a new install so I am trying to upgrade from maintenance partition and I followed instructions from "Installing Application Software to Any Application Partition" but I am not able to pinv...
This should be so simple but I cannot get this to work. I am trying to map an external IP to a server on the network. I have the ACL and static statements in place but still can't connect from the outside. I have a feeling that some NAT statement som...
