hi,one short question regarding lms and anti-virus software. is it ok to install a anti-virus software like avira etc. on an lms system? are the known problems or restrictions when running anti-virus software on an lms server?thnaksandré
hi,one short question regarding lms and anti-virus software. is it ok to install a anti-virus software like avira etc. on an lms system? are the known problems or restrictions when running anti-virus software on an lms server?thnaksandré
Is there any way to distinguish between 6509 and 6509-E chassis in Ciscoworks reports?
I am running Campus Manager 5.0.2 and since going to snmpv3 Topology Services is showing almost half of our 1000 devices as unreachable/unconnected devices. However, credential checks on these devices show good snmpv3 response. Also, these devices ha...
Hi,I have WLC and it is not coming green on the topology service when theSNMP v2 or v3 is enabled. But it shows green when I enable SNMP v1 on it.How can we set SNMP v2 or v3 on WLC to have the device come green in Topology as well?-Thanks
Hello,LMS 3.0 is configured &working fine sofar.Now we are getting the below alert message"EVENT ID = 0001K09ALERT ID = 0000CB8TIME = Mon 19-Oct-2009 10:52:59 ASTSTATUS = ActiveSEVERIT...
I'm having a strange issue. We have a router that is connected to an OC12 and it is sending ingress netflow data on all layer 3 interfaces.The thing that I'm seeing is that the bandwidth utilization will go over the bandwidth of the OC12. I've seen...
In LMS 3.1 the DNS resolve for DFM is not working showing just the ip address instead of dns name. Is this a bug in release 3.1 or am I missing something? The DNS records should be configured allright.Thank you for any feedback on this issue.
I have enabled DFM polling on Campus Manager Topology View. However, I notice quite a number of devices has the Alerts indicator but when I drilled into DFM alert there is no alert exist the current time or even on the last 24 hours. Shouldn't the in...
Setting up an SMTP gateway to send the password out to our internet Mail Server worked well with CiscoWorks notifications. I've got stuck with NAM (Network Analysis Module) email notifications. It does not have the option of configuring SMTP password...
Hi,get anyone some output for the "reclaim unused up/down access port report" ?? I alway get the message "No records found for this report". We have some switches with such port where we expected a report for unused portsThanksAndré
Hello, I have configured the SMTP server in Cisco Common Services under Server -> Admin.For e.g. the SMTP Server is: mail.abc.com Administrator Email Id: test@abc.comHowever, when I run a RME sync archive job with my email id (test@abc.com) it fai...
How can I force RME to run a poll or config collection on a single device. I have tried SYNC and that does not seem to do it.
Hi,Please can some helps me using LMS to find to whith switch port number a computer is connected when I have only its IP address?I'm using tracking but it's not working and every thing else is well done.Regards,Omar
Hi,I have still the problem with the error "Internal error in communication channel" under LMS 3.2 with three Win2k3 servers.In 90% of all tries to configure credentials under common services I get that error.I tried the same change of credentials di...
I run the process upgrade package RME 4.0.6 to Catalyst 6504-E and even so not resolved problems with config archive to device. what to do?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-23-2024 05:52 PM | ||
04-23-2024 12:20 AM | ||
04-16-2024 04:45 AM | ||
04-16-2024 01:33 AM | ||
04-13-2024 12:00 PM |
User | Count |
---|---|
2 | |
2 | |
2 | |
1 | |
1 |