Network Management

Hi,I'd need more details how to get chassis temperature value from Cisco routers/switches.So far I found 1.3.6.1.4.1.9.9.13.1.3.1.3 (ciscoEnvMonTemperatureStatusValue) present in CISCO-ENVMON-MIB shows the actual chassis temperature.This works perfec...

Hello;On LMS Portal System tab, i always see "Processes DFMCTMStartup, DataPurge are down" message bottom of the page.When I try to start this processes , they stop automatically a few seconds later.Also, about one day later some services are stop t...

When I try to load topology services I get can not connect to ANI server 6.0 unknown reason. I checked processes and the ANI server is flagged busy. I click on it and get the enclosed message.

Dear All, I am stuck up with a scenerio where i have to create a traffic redundancy using two 4507 Cisco Switches (L-3), Say Switch-1 & Switch-2 for gateway. both these Swithes would be connect to parent node(WAN) by two WAN links on each and at lo...

I'm trying to save an adjusted map layout in Campus Manager using save layout. As long as LMS stays running my saved layout is preserved between logins, however if LMS restarts for any reason (net stop/start or serve reboot) then we seem to lose the ...

I have a need to do two tasks, one to suspend monitoring and alerting with DFM for a maintenance window. It will take all the access to devices down for 3 hours. Second, I also get requests from other engineers that they have a change and they (due t...

Dear All,I need your suggestion regarding enabling of snmp traps on cisco devices. What is the recommended set of traps we should enable on devices ? I am asking this becasue we have few very low bandwidth links ( 128 kbps ) at some of our enterprise...

I made an Discovery and this procces found 422 devices but when I'm trying to add those devices they don't are not shown in Allocator Devices.I tried to add a couple of devices manually but Device Manager says the device is duplicated.I'm very compli...

Hi tEAMPLEASE LET ME KNOW THE PROCEDURE OF up GRADING RME or CAMPUS MANGER OR DFM.I need exact procedure.what is diffence betwen software update or device update.ASA IS NOT SHOWING IN THE LIST OF RME.LMS version 2.6 and it is integrated with ACS.Rega...

I have downloaded and installed SDM onto my laptop and downloaded the SDM_Demo_Tool file which I copied to C:\ as instructed. I then ran SDM, entered 127.0.0.1 and received an error message saying that the router cannot be contacted or is not running...

For campus manager 5.1.1 error:I have the Topology services message:Connected to Campus Manager Server, Initializing...Please wait until this window closes before launching another campus application.I get this message hanging with the Topology Servi...

We have a NAM 3.6.1 and we wanted to use the rotate files option in capturing. We have setup a capture data storage sucessfully and shows the mount space. But in the the capture to disk settings it still won't let you choose rotate files and the new ...