Network Management

I have followed the directions on http://www.cisco.com/en/US/products/sw/cscowork/ps2421/products_user_guide_chapter09186a00804fc54a.html to setup DFM to forward syslog events to my email. These current settings are not working at all. Here are my s...

Hi,I do not understand what does it mean this trap : "tty—Sends Cisco enterprise-specific notifications when a TCP connection closes"When i enable this trap, i received some thousands of syslog : "20060303 133708 SNMP 10.52.49.134 Trap(tcpConnectionC...

Error:SSO AS is unreachable. Using non SSO. The cert on CW was somehow changed to another host and CW was restarted. I changed the host name back to its original name and restarted CW, but the sso error still appears when accessing peers.

I have been seeing more of these errors lately. What gives? Anyone know what this error is for? I am seeing them in archive management for partially successful devices.CM0012: Unable to create new version on archive $1 Action: Check if disk space is ...

We are migrating from a Frame PVC based WAN to a fully meshed MPLS WAN.In the Frame PVC world, if there were 2 paths from a location\router to another location\router via different PVC, we were able to pull MIB information from the subinterfaces on t...

Dear All,I'm going to configure a CNR server for a Docsis network. My boss wants allocate IP address by Cnr in a static way, i.e. he wants allocate a small subnet to each customer, becasuse in this way we can manage QoS based on Ip subnet. How Can I...

it's possible to manage the switch ws-500 by ciscowrks LMS 2.6 (detected and managed by LMS 2.6)please can anyone answer me.thank you.

I am new with this CNA tool...Is there a way to use and connect it directly to a switch port and just specify the switch IP address?Please advise

I need to install a web cache like squid, but I want to do it transparently using the cisco WCCP version 2 or the WCCP version 1, but my 871 series does not support that feature, only 1600, 2500 and upper series.. what do you recommend me in order to...

Hello, i have an edge router on our backbone (cisco7613 + Sup720). It is running s72033-adventerprisek9_wan-mz.122-33.SRA3.bin and after some initial configurations i get the message "Unable to get configuration. Try again later." after issuing "wr m...

Dear all,How can I make a top N report for a specific protocol or application? For example; track the top users that using MSN messenger and so on.Kindly need a clear answer.

Hi, When I use ciscoview to view my device that is router 7513MX and at Packet Over Sonet slot, it appear incorrectly. It miss some light indicator as picture attached in POS slot and there is no Link TX RX status on Enchance Gigabit Ethernet as wel...