we use putty to login catalyst 3550. one of the switches recently doesnt let me login. this is the info given by putty:"connection refused"the user on the switch work fine.what is the possible problem?
I have started have fun and games when I try running compliance checks against a baseline template. I am sure I didnt have this problem a couple of months ago when I first tested this out.I have set up a template which contains the line: - snmp-serve...
I have a 220 user network (192.168.1.1/24) and will soon be adding many new users > 300. How can I add the additional users without changing the 192.168.1.x/24 network? Thanks in advance,
Hi, Any Cisco egineer here?we have two more Object ID's that aren't in Cisco's products MIB list:1.3.6.1.4.1.9.1.694 (some sort of 24 port 2960)1.3.6.1.4.1.9.1.696 (some other sort of 24 port 2960)Can Cisco update their MIBs?
On a Cat6513 running CatOS 8.4(4), PS1 (WS-CAC-6000W) became disabled due to the following:2006 Sep 30 06:48:32 edt -04:00 %SYS-4-PS_INPUT:Power supply 1 input decreased2006 Sep 30 06:48:32 edt -04:00 %SYS-1-SYS_DISABLEPS: Rating of power supplies in...
Can anyone point me to a documentation that indicates how to suppress some of the native Syslog messages sent by IOS (ie: ENV when a power supply is found to be faulty, a bad fan, etc)? I?ve read about documentation that indicates that the Embedded S...
Good day i have a 1720 cisco router and i am trying to get ftp working on it. But as per the documnetation i dont have an enable ftp-server option on the routers configration mode.
I have a new installation of LMS 2.6. But the changes of e.g. SMTP Server and Email ID in the CS System Preferences are not overwritten although I got a message that the change was successfull.
Hi all,Just found out that Syslog on RME does not reflect on Alerts and Activities. Is there a way that if there is a syslog message on RME can also be viewed or alerted on DFM?The syslog i have is SLOS with a warning severity, but this SLOS does not...
starting inr RME netconfig jobs I get:"Error occured while processing.Possible Cause: URN_NOT_FOUND : urn "JRM" : Not found !!"( I had the hope that this version would fix at least 1 of my old problems - but instead I got more...)
We had defined many routers into the BBSM, each of them matching a specific client class C subnet. On that router we defined a null switch. That setup used to work well except BBSM becoming to take more and more CPU when we had a router.To ease the c...
